Toward the development of versatile functionalized carbon nanotubes

Toward the development of versatile functionalized carbon nanotubes
复制标题

致力于开发多功能功能化碳纳米管

DOI:
10.1039/c4ra17292b
复制
发表时间:
2015-04
期刊:
影响因子:
3.9
通讯作者:
Wei Yen
Wei Yen
中科院分区:
化学3区
文献类型:
--
作者:
Li Zhen;Zhang Qingsong;Zhang Xiaoyong;Wei Yen

文献摘要

参考文献

被引文献

相似文献

利用聚合物对碳纳米管进行表面改性是提高碳纳米管应用性能的一种常用而有效的方法。本文首次提出了一种利用贻贝化学和单电子转移活性自由基聚合(SET-LRP)合成疏水性和亲水性碳纳米管的简便方法。通过透射电子显微镜、傅里叶变换红外光谱、热重分析和X射线光电子能谱等一系列表征技术证实了这些CNT-聚合物复合材料的成功合成。这些碳纳米管表现出显着增强的水和不同的有机溶剂后,它们的表面功能化的亲水性和疏水性聚合物。该合成策略方便、通用且环境友好,可扩展用于许多其他聚合物纳米复合材料的制造。因此,本工作中开发的方法可能会打开一个新的路线,以制备不同应用的功能CNT-聚合物复合材料。
Surface modification of carbon nanotubes (CNT) with polymers is a general and effective strategy to improve the performance of CNTs for applications. In this work, a facile strategy to synthesize hydrophobic and hydrophilic CNT by mussel inspired chemistry and Single-Electron Transfer Living Radical Polymerization (SET-LRP) was developed for the first time. The successful synthesis of these CNT–polymer composites was confirmed by a series of characterization techniques including transmission electron microscopy, Fourier transform infrared, thermogravimetric analysis and X-ray photoelectron spectra. These CNT exhibited obviously enhanced dispersibility in water and different organic solvents after they were surface functionalized with hydrophilic and hydrophobic polymers. The synthetic strategy is convenient, versatile and environmentally friendly and can be extended for fabrication of many other polymer nanocomposites. Therefore, the method developed in the present work might open a new route to fabricate functional CNT–polymer composites for different applications.
DOI: 10.1016/j.carbon.2006.07.011
发表时间: 2007
期刊: Carbon
影响因子: 10.9
作者:
Huixia Wu;R. Tong;Xue-Qiong Qiu;Haifeng Yang;Yanghui Lin;R. Cai;S. Qian
通讯作者: Huixia Wu;R. Tong;Xue-Qiong Qiu;Haifeng Yang;Yanghui Lin;R. Cai;S. Qian
DOI: 10.1002/adma.201470002
发表时间: 2014
期刊: Advanced Materials
影响因子: 29.4
作者:
U. Maiti;W. Lee;Ju Min Lee;Youngtak Oh;J. ·. Kim;Ji-eun Kim;Jongwon Shim;T. Han;S. Kim
通讯作者: U. Maiti;W. Lee;Ju Min Lee;Youngtak Oh;J. ·. Kim;Ji-eun Kim;Jongwon Shim;T. Han;S. Kim
将贻贝启发的化学与 SET-LRP 相结合:碳纳米管表面功能化的新策略
DOI: 10.1002/pola.27638
发表时间: 2015
影响因子: --
作者:
Tian Jianwen;Xu Dazhuang;Liu Meiying;Deng Fengjie;Wan Qing;Li Zhen;Wang Ke;He Xiaohui;Zhang Xiaoyong;Wei Yen
通讯作者: Wei Yen
受贻贝启发的超轻多功能 3D 氮掺杂石墨烯气凝胶
DOI: 10.1016/j.carbon.2014.08.054
发表时间: 2014
期刊: Carbon
影响因子: 10.9
作者:
Song Xinhong;Lin Liping;Rong Mingcong;Wang Yiru;Xie Zhaoxiong;Chen Xi
通讯作者: Chen Xi
DOI: 10.1016/j.biomaterials.2009.09.062
发表时间: 2010-01
期刊: BIOMATERIALS
影响因子: 14
作者:
Brubaker, Carrie E.;Kissler, Hermann;Wang, Ling-Jia;Kaufman, Dixon B.;Messersmith, Phillip B.
通讯作者: Messersmith, Phillip B.