Determination of Settings of a Tilted Head-Cutter for Generation of Hypoid and Spiral Bevel Gears.
Determination of Settings of a Tilted Head-Cutter for Generation of Hypoid and Spiral Bevel Gears.
复制标题
DOI：
10.1115/1.3258950
复制
发表时间：
1988-12
期刊：
影响因子：
--
通讯作者：
F. Litvin;Yi Zhang;M. Lundy;Charles F. Heine
中科院分区：
文献类型：
--
作者：
F. Litvin;Yi Zhang;M. Lundy;Charles F. Heine
摘要：准双曲面和弧齿锥齿轮的综合一直是格里森工程师深入研究的一个重要问题。格里森工程师设计了切割和磨削准双曲面和螺旋锥齿轮的机器，这些齿轮在行业中广泛使用。格里森齿轮切割机采用了一种巧妙的机构。该机构通过倾斜热切割器来提供所需的小齿轮压力角，从而减少不同切割器刀片的数量。Lehmann对斜头切割机的机构作了简要的描述，但没有给出设置所需的基本方程。本文的目的是对摆动机构的运动学进行研究，并推导出机床装置安装的基本方程。(JES)。
Abstract : The synthesis of hypoid and spiral bevel gears is an important problem that has been a subject of intensive research by Gleason engineers. Gleason engineers have designed machines to cut and grind hypoid and spiral bevel gears that are widely used in the industry. An ingenious mechanism is used in the Gleason gear cutting machines. This mechanism provides the required pinion pressure angle by tilting the heat-cutter and thereby reducing the number of different cutter blades. A short description of the tilt head-cutter mechanism has been given by Lehmann but the basic equations that are necessary for the settings have not been presented. The purpose of this paper is to investigate the kinematics of the tilt-mechanism and to derive the basic equations for the installment of the machine-tool settings. (JES).