Electrodeposition of mesoporous manganese dioxide supercapacitor electrodes through self-assembled triblock copolymer templates

Electrodeposition of mesoporous manganese dioxide supercapacitor electrodes through self-assembled triblock copolymer templates
复制标题

DOI:
10.1016/j.jpowsour.2006.10.100
复制
发表时间:
2007-02
影响因子:
9.2
通讯作者:
Tong Xue;Cailing Xu;Dandan Zhao;Xiaohong Li;Hu-lin Li
Tong Xue;Cailing Xu;Dandan Zhao;Xiaohong Li;Hu-lin Li
中科院分区:
工程技术2区
文献类型:
--
作者:
Tong Xue;Cailing Xu;Dandan Zhao;Xiaohong Li;Hu-lin Li

文献摘要

被引文献

相似文献

以三嵌段共聚物(Pluronic P123和F127)为结构导向剂,将介孔二氧化锰超级电容器电极材料电化学沉积在涂有Pt的硅衬底上.用X射线衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)对二氧化锰薄膜的沉积电极进行了物理表征,并在0.5M Na2SO4电解液中用循环伏安法(CV)对二氧化锰薄膜的电化学性能进行了表征。以F127为模板的介孔MnO2在10mVs− 1的扫描速率下获得了449Fg− 1的最大比电容(SC)值。
Mesoporous manganese dioxide supercapcitor electrode materials were electrochemically deposited onto silicon substrates coated with Pt using triblock copolymer species (Pluronic P123 and F127) as the structure-directing agents. Deposited electrodes of manganese dioxide film were physically characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and were electrochemically characterized by cyclic voltammetry (CV) in 0.5M Na2SO4electrolyte. Maximum specific capacitance (SC) values of 449Fg−1was obtained at a scan rate of 10mVs−1from F127 templated mesoporous MnO2.