Research in Shape Meter Roll Deflection Compensation Model
Research in Shape Meter Roll Deflection Compensation Model
复制标题
形状测量辊挠度补偿模型研究
DOI：
--
复制
发表时间：
2010
期刊：
影响因子：
--
通讯作者：
Pengfei Wang
中科院分区：
文献类型：
--
作者：
J. Liu;Dian;Pengfei Wang
在板形测量系统中，板形辊的挠度会对板形测量信号产生影响。采用影响函数法对板形辊应力进行了分析，建立了板形辊挠度模型。根据板形辊在轧制过程中的变形建立了模型，并得到了补偿曲线。结果表明，板形设定曲线与板形在线检测曲线吻合较好，可获得较好的板形。
In flatness measurement system, the flatness measuring signal can be affected by the flatness roll deflection. The flatness roll stress was analyzed and the flatness roll deflection model was obtained by using the influence function method in this paper. The model has been developed based on the deformation of flatness roll in rolling and compensating curve has been obtained. The results indicated that the setting curve of flatness is preferably accordant with the curve of online measuring flatness, and good strip flatness can be obtained.