Analysis of Characteristic Process Parameters to Identify Unstable Process Conditions during Wire EDM
Analysis of Characteristic Process Parameters to Identify Unstable Process Conditions during Wire EDM
复制标题
分析特征工艺参数以识别线切割加工过程中的不稳定工艺条件
DOI：
10.1016/j.promfg.2018.11.018
复制
发表时间：
2018
期刊：
影响因子：
--
通讯作者：
Klocke
中科院分区：
文献类型：
--
作者：
Tombul;Herrig;Olivier;Klocke
The demand for higher efficiency in aircraft propulsion engines leads to materials with increasing thermo-mechanical strengths. The high mechanical process forces in conventional cutting processes cause inacceptable geometrical deviations. Due to the electro-thermal material removal mechanism, wire electrical discharge machining (EDM) is a promising alternative manufacturing process. The manufacturing process is not restricted to thermo-mechanical properties (e.g. hardness or high-temperature strength). However, it is necessary to increase productivity to get a better competitive position. Unstable process conditions limit the productivity of the wire EDM process and the quality of the workpieces. These process conditions are characterized by misdischarges and short discharges, which lead to undesirable changes of material properties and thus to wire breakages. Moreover, a wire breakage interrupts the wire EDM process and extends the machining time. Therefore, this paper deals with the analysis of characteristic parameters to identify unstable process conditions during wire EDM. For that purpose, the differences between characteristic parameters of a stable and unstable wire EDM process are investigated. Furthermore, the distribution of the different types of discharges are analyzed. Results of the investigations are supposed to provide a basis for early detection of possible wire breakages and thus an adaption of control algorithm. Therefore, a stable and an automatable manufacturing process can be achieved and increase the productivity especially when machining relevant turbomachinery parts like fir tree slots in disks.
登录
查看更多内容
航空航天材料的高性能切割
DOI：
10.4028/www.scientific.net/amr.498.127
发表时间：
2012
期刊：
Advanced Materials Research
影响因子：
--
作者：
A. Krämer;D. Lung;F. Klocke
通讯作者：
F. Klocke
电火花线切割加工电极波动的计算机模拟及特性分析
影响因子：
6.3
作者：
Z. Guo;T. Yue;Tai;W. Lau
通讯作者：
W. Lau
电火花加工放电位置检测的研究
DOI：
10.2526/jseme.26.53_58
发表时间：
1992
期刊：
Journal of the Japan Society of Electrical-machining Engineers
影响因子：
--
作者：
H. Obara;A. Tsuge
通讯作者：
A. Tsuge
断丝对电火花加工工艺能量利用的影响
DOI：
10.1016/j.procir.2016.02.264
发表时间：
2016
期刊：
Procedia CIRP
影响因子：
--
作者：
J. Gamage;A. DeSilva
通讯作者：
A. DeSilva
线切割加工断丝过程及监测研究
DOI：
10.1016/s0890-6955(95)00049-6
发表时间：
1997
影响因子：
14
作者：
Y. Liao;Y. Chu;M. Yan
通讯作者：
M. Yan