on Circuit , Power and Computing Technologies [ ICCPCT ] Smart Street Light System based on Image Processing
on Circuit , Power and Computing Technologies [ ICCPCT ] Smart Street Light System based on Image Processing
复制标题
电路、电源和计算技术研究 [ ICCPCT ] 基于图像处理的智能路灯系统
DOI：
--
复制
发表时间：
2016
期刊：
影响因子：
--
通讯作者：
T. S. Jyothis
中科院分区：
文献类型：
--
作者：
P. C. Veena;Paulsy Tharakan;Hima Haridas;K. Ramya;Riya Joju;T. S. Jyothis
本文介绍了提高城市能源效率的路灯系统概念。现在，人们太忙了，甚至没有时间在不需要的时候关灯。该系统的工作原理是这样的，路灯在晚上太阳下山前切换到开状态，第二天早上道路上有足够的光线后关闭。本文给出了降低能耗的最佳解决方案。该系统检测高速公路上的车辆运动/人员存在，只打开前面的一大块路灯，并关闭尾随灯，以减少能源消耗。这是通过处理接近物体的图像，然后向路灯块发送控制信息来实现的。该系统的其他吸引人的特点还包括使用合适的传感器来检测故障的路灯，然后通过GSM调制解调器向控制机构发送短信，以便采取适当的行动。关键词：LED灯，树莓派，传感器，LDR， OLFC
This article presents streetlight system, the concept to boost energy efficiency of a city. Nowadays, people are too busy, and unable to find time even to switch OFF the lights whenever not required. The system works like, the street lights are changed to ON state in the evening before the sun sets and they are switched OFF next day morning after there is enough light on the roads. This paper gives the best solution for reducing the energy consumption. This system detect vehicle movement/human presence on highways to switch ON only a chunk of street lights ahead of it and to switch OFF the trailing lights in order to reduce consumption of energy. This is achieved by processing the image of approaching object and then sending control message to the street light block. Additional attractive features of the system using suitable sensors for detecting the failed street light and then sending an SMS to the control authority via GSM modem for appropriate action are also included. Keywords— LED Lamps, Raspberry pi, sensors, LDR, OLFC