A low-noise reconfigurable full-duplex front-end with self-interference cancellation and harmonic-rejection power amplifier for low power radio applications

A low-noise reconfigurable full-duplex front-end with self-interference cancellation and harmonic-rejection power amplifier for low power radio applications
复制标题

适用于低功率无线电应用的低噪声可重构全双工前端,具有自干扰消除和谐波抑制功率放大器

DOI:
--
复制
发表时间:
2017
期刊:
European Solid-State Circuits Conference
影响因子:
--
通讯作者:
J. Rudell
J. Rudell
中科院分区:
--
文献类型:
--
作者:
Tong Zhang;Yongdong Chen;Chenxi Huang;J. Rudell

文献摘要

被引文献

相似文献

提出了一种包括自干扰(SI)消除电路和谐波抑制功率放大器(HPA)的低功率无线电模拟前端,以减少发射机(TX)和接收机(RX)之间的相互作用,从而实现全双工操作。台积电原型器件在4MHz带宽上实现了超过30dB的SI消除,PA三次和五次谐波分别降低了30dB和15dB。该电路的有源面积为131×112.5μm2,在1.2V电源电压下功耗为0.25mW,接收噪声衰减小于0.6dB。
A low-power radio analog front-end which includes a self-interference (SI) cancellation circuit and a harmonic-rejection power amplifier (HRPA), is proposed to reduce the interaction between a transmitter (TX) and receiver (RX), to enable full-duplex operation. A prototype TSMC device demonstrates more than 30dB SI cancellation over a 4MHz BW and a PA 3rd and 5th harmonic reduction of 30dB and 15dB, respectively. The SI cancellation circuitry occupies an active area of 131×112.5μm2, consumes 0.25mW from a 1.2V supply and degrades the RX NF by less than 0.6dB.