Study on Gap Phenomena Before and After the Breakout Event of Fast Electrical Discharge Machining Drilling
Study on Gap Phenomena Before and After the Breakout Event of Fast Electrical Discharge Machining Drilling
复制标题
快速电火花加工钻孔爆发前后间隙现象研究
DOI：
10.1115/1.4046249
复制
发表时间：
2020-04
期刊：
影响因子：
--
通讯作者：
Zhao Wansheng
中科院分区：
文献类型：
--
作者：
Xia Weiwen;Zhang Yaou;Chen Mo;Zhao Wansheng
Fast electrical discharge drilling is broadly used to manufacture small holes on molds, dies, filters, and automobile and aerospace components. Breakout is the event when the tool electrode reaches the opposite surface of the workpiece. When a breakout happens, the machining efficiency drops sharply and the process becomes unstable. To gain a deep understanding of the breakout process, this paper observed the gap phenomena before and after the breakout with cameras through a quartz glass flake. Experiments were conducted on the workpiece tilted to 45 deg. From the observation, it was found that the deformation of the electrode was not negligible. The electrode would vibrate or shake before and after the breakout. Side-gap sparks were common in the process, and even more were observed after the breakout. The fluid flow in the discharge gap and the side gap did not vanish immediately when a breakout happened and could still evacuate debris for a short period. The debris gradually accumulated as the fluid flow in the gap vanished. A series of simulations were conducted to study the fluid flow and debris movement after the breakout. And simulations were also performed to find the influence on electrode vibration of high-pressure flush fluid and discharge location. The results of simulations agreed well with the observed phenomena. From the observation and simulation results, the deformation or vibration of the electrode and the accumulation of debris were found to be the main factors that led to the low machining efficiency after the breakout.
登录
查看更多内容
DOI：
10.1115/1.4026298
发表时间：
2014-06
影响因子：
4
作者：
Soham Mujumdar;D. Curreli;S. Kapoor;D. Ruzic
通讯作者：
Soham Mujumdar;D. Curreli;S. Kapoor;D. Ruzic
DOI：
10.2526/ijem.8.51
发表时间：
2003
期刊：
International journal of electrical machining
影响因子：
--
作者：
M. Kunieda;Mariko Tohi;Y. Ohsako
通讯作者：
M. Kunieda;Mariko Tohi;Y. Ohsako
DOI：
10.1115/1.4039647
发表时间：
2018-06
期刊：
Journal of Manufacturing Science and Engineering
影响因子：
--
作者：
Kamlesh Joshi;U. Bhandarkar;I. Samajdar;S. Joshi
通讯作者：
Kamlesh Joshi;U. Bhandarkar;I. Samajdar;S. Joshi
DOI：
10.1115/1.4040321
发表时间：
2018-05
期刊：
Journal of Manufacturing Science and Engineering
影响因子：
--
作者：
H. Paktinat;S. Amini
通讯作者：
H. Paktinat;S. Amini
DOI：
10.1007/s00170-014-6008-z
发表时间：
2014-06
期刊：
The International Journal of Advanced Manufacturing Technology
影响因子：
--
作者：
Jin Wang;Fuzhu Han
通讯作者：
Jin Wang;Fuzhu Han