Computer modelling of sintering: theory and examples
Computer modelling of sintering: theory and examples
复制标题
烧结的计算机建模：理论与实例
DOI：
--
复制
发表时间：
2010
期刊：
影响因子：
--
通讯作者：
Jingzhe Pan
中科院分区：
文献类型：
--
作者：
W. Niu;Jingzhe Pan
翻译后摘要：烧结工艺已被广泛用于生产粉末冶金零件和陶瓷部件。目前，工业界主要通过试错法来获得合适的工艺参数。与实际烧结试验相比，计算机模拟可以节约成本，为真实的生产提供更有价值的参考或指导。本章介绍了现有的烧结模型在不同的长度尺度，即模型在原子，颗粒和连续尺度分别。讨论了多尺度模型策略。在每个长度尺度，烧结理论和计算机模拟的数值技术进行了简要概述，并提供了一些典型的例子来证明模型的潜在用途。
Abstract: The sintering process has been widely used in producing powder metallurgy parts and ceramic components. At present, the industry obtains the proper processing parameters mainly by trial and error. Compared with the actual sintering trials, computer simulation can save cost and provide more valuable references or guidance for real production. This chapter presents existing sintering models at different length scales, i.e. models at atomic, particle and continuum scales respectively. The multiscale model strategy is also discussed. At each length scale, sintering theories and numerical techniques for the computer simulation are briefly outlined and some typical examples are provided to demonstrate the potential usefulness of the models.
含有大孔和小孔的粉末压块的致密化
影响因子：
3.9
作者：
Pan J
通讯作者：
Pan J