Microstructural characterization and mechanical properties of AlMg alloy fabricated by additive friction stir deposition
Microstructural characterization and mechanical properties of AlMg alloy fabricated by additive friction stir deposition
复制标题
DOI：
10.1007/s00170-023-10952-x
复制
发表时间：
2023-01
期刊：
影响因子：
--
通讯作者：
Z. Shen;Mingtao Zhang;Dongxiao Li;Xinyu Liu;Shaolong Chen;W. Hou;Yuquan Ding;Zhong-gang Sun;Yunquan Su;Wenya Li;Yanhong Tian
中科院分区：
文献类型：
--
作者：
Z. Shen;Mingtao Zhang;Dongxiao Li;Xinyu Liu;Shaolong Chen;W. Hou;Yuquan Ding;Zhong-gang Sun;Yunquan Su;Wenya Li;Yanhong Tian
This work investigates the microstructure characterization and mechanical properties of Al alloy fabricated by additive friction stir deposition (AFSD). Microstructure characterizations of the Al alloy 5B70 base material (BM) and build were compared using optical microscope (OM) and electron back scattered diffraction (EBSD). The hardness distribution in the direction perpendicular to the cross-section of the deposited area was systematically evaluated. Tensile tests were performed on the BM and the build using digital image correlation (DIC), and the real-time stress distribution states of the specimens were analyzed. After the tensile tests, the fracture micromorphology was characterized using scanning electron microscope (SEM). The results indicated that a high degree of recrystallization occurred in the deposition zone, where fine, equiaxed, and differently oriented grains are formed. It was found that the strength of the deposition layer was lower compared to that of the BM, but its toughness was significantly improved. Also, obvious anisotropy of mechanical properties was identified in the deposition layer.
