Investigation of Flux-Linkage Profile Measurement Methods for Switched-Reluctance Motors and Permanent-Magnet Motors
Investigation of Flux-Linkage Profile Measurement Methods for Switched-Reluctance Motors and Permanent-Magnet Motors
复制标题
DOI：
10.1109/tim.2009.2017154
复制
发表时间：
2009-06
影响因子：
5.6
通讯作者：
K. Lu;Peter Omand Rasmussen;Andrew Ewen Ritchie
中科院分区：
文献类型：
--
作者：
K. Lu;Peter Omand Rasmussen;Andrew Ewen Ritchie
开关磁阻电动机和永磁电动机的实际磁链-电流曲线在设计验证和性能预测中起着重要的作用。到目前为止，已经提出并讨论了各种测量方法，但每种方法都有其自身的局限性和约束。在本文中，首先，现有的测量方法的调查和比较报告。接下来，讨论并评估了一种简单的纯交流磁链测量方法，该方法不需要搜索线圈。给出了实验结果，获得使用所描述的交流方法上的SRM和PMM。对于这两个电机，测量的磁链电流曲线进行了比较，使用其他方法测量。比较结果表明，所提出的交流方法的SRM和PMM的有效性。
Knowledge of actual flux-linkage-versus-current profiles plays an important role in design verification and performance prediction for switched-reluctance motors (SRMs) and permanent-magnet motors (PMMs). Various measurement methods have been proposed and discussed so far, but each method has its own limitations and constraints. In this paper, first, an investigation and comparison of existing measurement methods is reported. Next, a simple pure AC flux-linkage measurement method is discussed and evaluated, which does not require a search coil. Experimental results are given, obtained using the described AC method on an SRM and on a PMM. For these two motors, the measured flux-linkage-current curves are compared to those measured using other methods. The comparison results show good effectiveness of the proposed AC method for both the SRM and the PMM.