Diode-type Gas Sensors Fabricated with a Titania Film on a Ti Plate and Pd-Pt Electrodes-Effects of Polymer Coating on the Hydrogen-sensing Properties-
Diode-type Gas Sensors Fabricated with a Titania Film on a Ti Plate and Pd-Pt Electrodes-Effects of Polymer Coating on the Hydrogen-sensing Properties-
复制标题
钛板上二氧化钛薄膜和 Pd-Pt 电极制作的二极管型气体传感器-聚合物涂层对氢传感性能的影响-
DOI:
10.1088/1757-899x/18/21/212006
复制
发表时间:
2011
期刊:
影响因子:
--
通讯作者:
Takeo Hyodo
中科院分区:
文献类型:
--
作者:
宮崎秀俊;田中優;飯塚拓也;井村敬一郎;木村真一;西野洋一;A. Matsuda;Takeo Hyodo
H 2 responses of a diode-type gas sensor fabricated with a TiO 2 film prepared by anodization of a Ti plate and Pd-Pt electrodes (Pd-Pt/TiO 2) and the effects of polymer coating on the Pd-Pt/TiO 2 sensor were investigated in this study. The H 2 response of the Pd-Pt/TiO 2 sensor in dry N 2 was larger than that in dry air at 250 C, but the addition of moisture into the atmosphere reduced O 2 concentration dependence of H 2 response. The responses decreased drastically at lower temperature (50 C), but the responses in N 2 were larger than those in air under both dry and wet conditions. The coating of polymer on the Pd-Pt/TiO 2 sensor increased the H 2 responses in wet air and N 2 and reduced O 2 concentration dependence of H 2 responses.