Description of the interactions during gear rolling as a basis for a method for the prognosis of the attainable quality parameters
Description of the interactions during gear rolling as a basis for a method for the prognosis of the attainable quality parameters
复制标题
DOI：
10.1007/s11740-007-0041-9
复制
发表时间：
2007-11-01
影响因子：
1.7
通讯作者：
Hellfritzsch, Udo
中科院分区：
文献类型：
--
作者：
Neugebauer, Reimund;Klug, Dirk;Hellfritzsch, Udo
齿轮滚轧正日益发展成为生产高精度齿轮的经济替代方案。因此，齿轮轧制的广泛工业应用的关键标准是可达到的齿轮质量。这目前仍然取决于基于经验专家知识的工艺和机器设计。为了最终开发出一种方法，该方法使得基于真实的过程数据对可达到的齿轮质量进行足够安全的预测成为可能，在跨学科研究项目的背景下，以适当的形式确定、描述和建模系统机床过程的相关相互作用。除了这个问题的基本方面的贡献认为，特别是与机器系统的相互作用对齿轮齿的节距精度的影响的问题。
Gear rolling develops increasingly to an economic alternative for the production of highly exact gears. Crucial criterion for broad industrial application of gear rolling is thereby the attainable gear quality. This depends at present still on a process and machine design, which is based on empirical expert knowledge. In order to finally develop a method, which makes a sufficiently safe prognosis for the attainable gear quality possible on the basis of real process data, in the context of a interdisciplinary research project the relevant interactions of the system machine-tool-process are determined, described and modeled in suitable form. Apart from the fundamental aspects of this problem the contribution argues in particular with the problem of the influence of the interactions of the machine system on the pitch accuracy of gear teeth.