Precipitation of oxygen in dislocation‐free silicon
Precipitation of oxygen in dislocation‐free silicon
复制标题
无位错硅中氧的沉淀
DOI:
10.1002/pssa.2210560123
复制
发表时间:
1979
期刊:
影响因子:
--
通讯作者:
D. Wruck
中科院分区:
文献类型:
--
作者:
K. Tempelhoff;F. Spiegelberg;R. Gleichmann;D. Wruck
The precipitation of oxygen in bulk dislocation-free Czochralski silicon subjected to isothermal annealing at temperatures between 400 and 1100 °C is studied by means of infrared spectroscopy and transmission electron microscopy. From the changes in the infrared spectra observed after heat treatment it is concluded that (i) for low annealing temperatures (400 to 750°C) the precipitates consist of amorphous SiOx (x < 2) which with rising temperature is transformed into amorphous SiO2, (ii) at medium annealing temperatures (750 to 950 °C) α-cristobalite precipitates are formed, which (iii) at high annealing temperatures (950 to 1100 °C) are converted in amorphous SiO2. In transmission electron microscopy the temperature range (i) is characterized by the appearance of “rod-like” defects and its transformation into dislocation loops, and the ranges (ii) and (iii) by the observation of platelet-shaped precipitates generating dislocation loops and stacking faults, leading to the conversion of the platelet-shaped precipitates into microprecipitates.
Es wird die Prazipitation von Sauerstoff in versetzungsfreiem Czochralski-Silizium nach isothermaler Warmebehandlung bei Temperaturen zwischen 400 und 1100 °C mit Hilfe der Infrarotspektroskopie und der Transmissions-Elektronenmikroskopie untersucht. Aus den Anderungen im Infrarotspektrum, die nach der Warmebehandlung beobachtet werden, wird geschlossen, das fur niedrige Temperungstemperaturen (400 bis 750 °C) die Prazipitate aus amorphem SiOx (x < 2) bestehen, welches sich mit wachsender Temperatur in amorphes SiO2 umwandelt, das bei mittleren Temperungstemperaturen (750 bis 950 °C) α-Cristobalit-Prazipitate gebildet werden, die sich bei hohen Temperungstemperaturen (950 bis 1100 °C) in amorphes SiO2 umwandeln. In der Transmissions-Elektronenmikroskopie wird der erste Temperaturbereich durch das Auftreten von „stabchenformigen” Defekten und deren Umwandlung in Versetzungsschleifen charakterisiert und die beiden anderen Temperaturbereiche durch die Beobachtung von plattchenformigen Prazipitaten, die Versetzungsschleifen und Stapelfehler erzeugen, was schlieslich zu einer Umwandlung der plattchenformigen Prazipitate in Mikroprazipitate fuhrt.