The composition and performance of alite-ye'elimite clinker produced at 1300 °C
The composition and performance of alite-ye'elimite clinker produced at 1300 °C
复制标题
DOI:
10.1016/j.cemconres.2018.02.009
复制
发表时间:
2018-05
影响因子:
11.4
通讯作者:
Yueyang Hu;Weifeng Li;Suhua Ma;Qian-qian Wang;Huiru Zou;Xiao-dong Shen
中科院分区:
文献类型:
--
作者:
Yueyang Hu;Weifeng Li;Suhua Ma;Qian-qian Wang;Huiru Zou;Xiao-dong Shen
Alite-ye'elimite clinker is a high cementing clinker prepared by introducing calcium sulfoaluminate, a non-silicate mineral, into the cement clinker. The mineral composition and mechanics of tricalcium silicate-rich sulfur aluminate prepared at 1300° C are reported. The effects of copper slag and phosphorus slag on the phase composition, heat release and compressive strength were investigated. The phase composition was analysed by X-ray powder diffraction. The results show that the copper slag and phosphorus slag can lower the burn temperature of the clinker and promote the coexistence of C 3 S and C 4 A 3 S¯. The quality of clinker produced at 1300° C is satisfactory. The compressive strength of mortar curing at 28 d is higher than that of P· II 52.5.