Research on generation of three-dimensional surface with micro-electrolyte jet machining
Research on generation of three-dimensional surface with micro-electrolyte jet machining
复制标题
DOI：
10.1016/j.cirpj.2008.06.006
复制
发表时间：
2008-01-01
影响因子：
4.8
通讯作者：
Kunieda, M.
中科院分区：
文献类型：
--
作者：
Natsu, W.;Ooshiro, S.;Kunieda, M.
提出了一种利用微电解液射流加工三维曲面的方法，讨论了如何确定喷嘴路径和扫描速度。为了验证该方法的有效性，将计算结果与加工结果进行了对比。研究发现，通过叠加基本弯曲凹槽可以生成三维表面，并且叠加和加工表面的横截面形状与目标表面的横截面形状之间具有良好的一致性，证明了所提出方法的有效性。另外，优化喷嘴路径间距的逐层加工是减小加工误差的有效途径。(C)2008年CIRP。
This paper proposes a method to generate three-dimensional surfaces with micro-electrolyte jet machining and discusses how to determine the nozzle path and scanning speed. In order to verify the effectiveness of the proposed method, calculated and machined results were compared. It was found that three-dimensional surfaces can be generated by superimposing elemental curved grooves, and good agreement between the cross-sectional shapes of the superimposed andmachined surfaces with those of the target surface proves the effectiveness of the proposedmethod. In addition, layer-by-layer machining with optimized interval of the nozzle path is an effective way to reduce machining errors. (C) 2008 CIRP.