Application of the central composite design and response surface methodology to the advanced treatment of olive oil processing wastewater using Fenton's peroxidation
Application of the central composite design and response surface methodology to the advanced treatment of olive oil processing wastewater using Fenton's peroxidation
复制标题
DOI：
10.1016/j.jhazmat.2005.03.042
复制
发表时间：
2005-08-31
影响因子：
13.6
通讯作者：
Mehranian, M
中科院分区：
文献类型：
--
作者：
Ahmadi, M;Vahabzadeh, F;Mehranian, M
采用中心复合设计（CCD）技术研究了Fenton过氧化反应对橄榄油厂废水中有机污染物的去除效果。过氧化氢与fe (II) （x(1)）的比值在1.67 ~ 8.33之间。Fe（II）浓度为0.03 M， H2O2浓度为0.05、0.15、0.25 M三个水平。根据摩尔浓度比，所选择的比例均在Fe（II）与H2O2之比(
The central composite design (CCD) technique was used to study the effect of the Fenton's peroxidation on the removal of organic pollutants from olive oil mill wastewater (OMW). The ratio of hydrogen peroxide-to-Fe(II) (x(1)) was between 1.67 and 8.33. Fe(II) concentration was constant at 0.03 M while the H2O2 concentration was set at three levels: 0.05, 0.15 and 0.25 M. Based on the molarity ratio, the selected ratio were in the low range of Fe(II)-to-H2O2 ratio (