Cutting Performance of (Ti, V) N Coated Cemented Carbide Tools
Cutting Performance of (Ti, V) N Coated Cemented Carbide Tools
复制标题
(Ti,V)N涂层硬质合金刀具的切削性能
DOI：
10.2497/jjspm.49.984
复制
发表时间：
2002
期刊：
影响因子：
--
通讯作者：
Takaomi Toihara
中科院分区：
文献类型：
--
作者：
T. Wada;Takaomi Toihara
在本研究中，使用具有多种 Ti 和 V 含量的 (Ti, V)N 涂层硬质合金刀具。为了明确车削SUS310S的有效刀具材料，对(Ti,V)N涂层硬质合金刀具的刀具磨损进行了实验研究。主要研究结果如下：（1）Ti75V25N涂层硬质合金具有高显微硬度和高临界划痕载荷。 (2) Ti75V25N涂层硬质合金刀具是车削SUS310S最有效的刀具材料。 关键词 车削、PVD、(Ti,V)N涂层、显微硬度、临界划痕载荷、刀具磨损、SUS310S
In this study, the (Ti, V)N coated cemented carbide tools that have several contents of Ti and V are used. In order to clarify the effective tool material for the turning of SUS310S, the tool wear of the (Ti, V)N coated cemented carbide tool is experimentally investigated. The main results obtained are as follows: (1) The Ti75V25N coated cemented carbide has high micro-hardness and high critical scratch load. (2) The Ti75V25N coated cemented carbide tool is the most effective tool material for the turning of SUS310S.KEY WORDS turning, PVD, (Ti, V)N coatings, micro-hardness, critical scratch load, tool wear, SUS310S