Three-dimensional stability analysis of robotic machining process
Three-dimensional stability analysis of robotic machining process
复制标题
机器人加工过程三维稳定性分析
DOI：
10.1108/ir-02-2019-0036
复制
发表时间：
2019-09
期刊：
影响因子：
--
通讯作者：
Zhong Luo
中科院分区：
文献类型：
--
作者：
Feng-Xia He;Li Dai;Qi-Sen Chen;Yu Liu;Zhong Luo
Purpose Since robot’s structural stiffness is usually less than 1 N/µm, mode coupling chatter occurs frequently during robotic milling process, and chatter frequency is close to the natural frequency of the robot itself. Chatter not only affects the surface quality but also damages the robot and reduces the positioning accuracy. Therefore, it is necessary to predict chatter in robotic machining process. Design/methodology/approach A three-dimensional dynamic model for robot’s spatial milling plane is established, and a corresponding stability criterion is obtained. First, the cutting force in milling plane is transformed into the coordinate system of the robot principal stiffness direction based on homogeneous transformation matrix. Then the three-dimensional stability criterion under milling process can be obtained by using system stability analysis. Furthermore, the circle diagram of mode coupling chatter stability is drawn. Each feeding direction’s stability under the two processing forms, referred as spindle vertical milling and spindle horizontal milling, is analyzed. Findings The experimental results verify that the three-dimensional stability criterion can avoid chatter by selecting machining feed direction in stable area. Originality/value This paper established a three-dimensional dynamic model in robot’s spatial milling plane and proposed a three-dimensional stability criterion according to the Routh criterion. The work is also expected to be an efficient tool in the development of robotic milling technology.
登录
查看更多内容
影响因子：
10.4
作者：
S. Mousavi;V. Gagnol;B. Bouzgarrou;P. Ray
通讯作者：
S. Mousavi;V. Gagnol;B. Bouzgarrou;P. Ray
DOI：
10.1016/j.ijmachtools.2010.01.003
发表时间：
2010-05-01
影响因子：
14
作者：
Ding, Ye;Zhu, LiMin;Ding, Han
通讯作者：
Ding, Han
DOI：
10.1016/s0007-8506(07)63411-8
发表时间：
1983
期刊：
CIRP Annals
影响因子：
--
作者：
J. Tlustý;W. Zaton;F. Ismail
通讯作者：
J. Tlustý;W. Zaton;F. Ismail
DOI：
10.1016/j.ijmecsci.2018.02.014
发表时间：
2018-04-01
影响因子：
7.3
作者：
Zhang, Zhao;Li, Hongguang;Meng, Guang
通讯作者：
Meng, Guang
DOI：
10.1115/1.4040161
发表时间：
2018-08-01
影响因子：
4
作者：
Cen, Lejun;Melkote, Shreyes N.;Appelman, Howard
通讯作者：
Appelman, Howard