Optimizing the overall configuration of a He-cooled W-alloy divertor for a power plant
Optimizing the overall configuration of a He-cooled W-alloy divertor for a power plant
复制标题
DOI：
10.1016/j.fusengdes.2008.12.069
复制
发表时间：
2009-06
期刊：
影响因子：
--
通讯作者：
A. Raffray;S. Malang;X. Wang
中科院分区：
文献类型：
--
作者：
A. Raffray;S. Malang;X. Wang
已经针对磁聚变能 (MFE) 发电厂应用提出了多种不同的氦冷偏滤器配置。它们的规模范围从特征尺寸为1m量级的板配置，到特征尺寸为10cm量级的ARIES-CS T形管配置，到特征尺寸为1.5cm量级的EU FZK手指概念。所有这些设计都利用钨或钨合金作为结构材料。本文考虑了不同偏滤器配置的特点，并提出了根据预期偏滤器热通量分布将不同配置组合到集成设计中来优化设计的可能性。
A number of different He-cooled divertor configurations have been proposed for magnetic fusion energy (MFE) power plant application. They range in scale from a plate configuration with characteristic dimension of the order of 1m, to the ARIES-CS T-tube configuration with characteristic dimension of the order of 10cm, to the EU FZK finger concept with characteristic dimension of the order of 1.5cm. All these designs utilize tungsten or tungsten alloy as structural material. This paper considers the characteristics of the different divertor configurations and proposes the possibility of optimizing the design by combining different configurations in an integrated design based on the anticipated divertor heat flux profile.