Automated System for Air Pollution Detection and Control in Vehicles
Automated System for Air Pollution Detection and Control in Vehicles
复制标题
车辆空气污染检测和控制自动化系统
DOI：
--
复制
发表时间：
2016
期刊：
影响因子：
--
通讯作者：
T. Teja
中科院分区：
文献类型：
--
作者：
A. Kulkarni;T. Teja
每辆车都有自己的废气排放量，但当排放量超过标准值时就会出现问题。废气排放量超标的主要原因，是车辆保养不当，导致引擎燃料燃烧不完全。这些车辆排放的废气不可能完全避免，但绝对可以控制。本课题的目的是利用污染控制电路对车内污染物进行监测和控制。该污染控制电路由各种传感器组成，如烟雾传感器，温度传感器和GSM，GPS类设备，所有这些都集成并连接到一个控制器。这是一个真实的时间的工作，其中一个演示应用程序已在其中使用ARM 7处理器和控制器板，所有这些设备得到集成和相应的工作。车辆由该电路控制。当车辆达到一定的thre shold污染水平，然后发动机被自动关闭，并生成一个SMS，并通过GSM模块发送到存储在存储器中的预定义号码。GPS模块用于定位车辆停止的位置。本文展示了技术的有效利用，通过控制车辆污染来拯救我们的环境。
Every vehicle has its own emission of gases, but the problem occurs when the emission is beyond the standardized values. The primary reason for this breach of emission level being the incomplete combustion of fuel supplied to the engine which is due to the improper maintenance of vehicles. This emission from vehicles cannot be completely avoided, but it definitely can be controlled . The aim of the project is to monitor and control the pollutants in the vehicle by using the pollution control circuit. This pollution control circuit consists of various sensors like smoke sensor, temperature sensor and GSM, GPS kind of devices, and all of them are integrated and connected to a Controller. It is a real time work where a demo application has been made in which ARM 7 processor is used and a controller board is made where all these devices get integrated and work accordingly. The vehicle is controlled by this circuit. When a vehicle attains certain thre shold pollution level then the engine gets automatically switched off and an SMS is generated and sent to the pre-defined number stored in the memory through the GSM module. The GPS module is used to locate the vehicle position where it is halted. This paper demonstrates an effective utilization of technology by which we save our environment by controlling the pollution of vehicles.