HotFlex: Post-print Customization of 3D Prints Using Embedded State Change
HotFlex: Post-print Customization of 3D Prints Using Embedded State Change
复制标题
HotFlex：使用嵌入式状态更改进行 3D 打印的打印后定制
DOI：
10.1145/2858036.2858191
复制
发表时间：
2016
期刊：
影响因子：
--
通讯作者：
Jürgen Steimle
中科院分区：
文献类型：
--
作者：
Daniel Groeger;E. C. Loo;Jürgen Steimle
虽然3D打印在打印物体之前提供了很大的设计灵活性，但最终用户很难在打印后根据他们的特定需求定制3D打印物体。我们建议HotFlex：一种新的方法，允许精确定位的3D对象的部分，从一个固体到一个可变形的状态和要求转换回来。这种方法可以在打印3D对象后对其进行直观的动手重塑、个性化和定制。我们介绍的方法，并提出了一种基于计算机控制的印刷加热元件，嵌入在3D对象的实现。我们提出了一组功能模式，作为构建块，并使各种形式的动手定制。此外，我们演示了如何整合用户输入和视觉输出的传感。一系列的技术实验和各种应用实例证明了该方法的实际可行性。
While 3D printing offers great design flexibility before the object is printed, it is very hard for end-users to customize a 3D-printed object to their specific needs after it is printed. We propose HotFlex: a new approach allowing precisely located parts of a 3D object to transition on demand from a solid into a deformable state and back. This approach enables intuitive hands-on remodeling, personalization, and customization of a 3D object after it is printed. We introduce the approach and present an implementation based on computer-controlled printed heating elements that are embedded within the 3D object. We present a set of functional patterns that act as building blocks and enable various forms of hands-on customization. Furthermore, we demonstrate how to integrate sensing of user input and visual output. A series of technical experiments and various application examples demonstrate the practical feasibility of the approach.
Foldio：利用可折叠印刷电子产品数字化制造交互式和变形物体
DOI：
10.1145/2807442.2807494
发表时间：
2015
期刊：
Proceedings of the 28th Annual ACM Symposium on User Interface Software & Technology
影响因子：
--
作者：
Simon Olberding;Sergio Soto Ortega;Klaus Hildebrandt;Jürgen Steimle
通讯作者：
Jürgen Steimle