Structure from motion (SfM) photogrammetry as alternative to laser scanning for 3D modelling of historical monuments
Structure from motion (SfM) photogrammetry as alternative to laser scanning for 3D modelling of historical monuments
复制标题
运动结构 (SfM) 摄影测量作为激光扫描的替代方案,用于历史古迹的 3D 建模
DOI:
10.23954/osj.v5i2.2327
复制
发表时间:
2020
影响因子:
2.8
通讯作者:
O. A. Khalil
中科院分区:
文献类型:
--
作者:
O. A. Khalil
During the past few years, new developments have occurred in the field of 3D photogrammetric modeling of culture heritage. One of these developments is the expansion of 3D photogrammetric modeling open-source software, such as VisualSfM, and cost-effective licensed software, such as Agisoft Metashape into the practical and affordable world. This type of SfM (Structure from Motion) software offers the world of 3D modelling of culture heritage a powerful tool for documentation and visualization. On the other hand, low-cost cameras are now available on the market. These cameras are characterized by high resolution and good quality lens, which makes them suitable for photogrammetric modelling. This paper reports on the results of the application of a SfM photogrammetry system in the 3D modelling of Safita Tower, a medieval structure in Safita, north-western Syria. The applied photogrammetric system consists of the Nikon Coolpix P100 10 MP digital camera and the commercial software Agisoft Metashape. The resulted 3D point clouds were compared with an available dense point cloud acquired by a laser scanner. This comparison proved that the low-cost SfM photogrammetry is an accurate methodology to 3D modeling historical monuments.
DOI:
10.1016/j.isprsjprs.2013.04.009
发表时间:
2013-08-01
影响因子:
12.7
作者:
Lague, Dimitri;Brodu, Nicolas;Leroux, Jerome
通讯作者:
Leroux, Jerome
DOI:
--
发表时间:
2019
期刊:
影响因子:
--
作者:
Dino Klotz;Thomas Defferriere;Jennifer L. M. Rupp;Harry L. Tuller
通讯作者:
Harry L. Tuller