Assessment of the FAA3-50 polymer electrolyte in combination with a NiMn2O4 anode catalyst for anion exchange membrane water electrolysis
Assessment of the FAA3-50 polymer electrolyte in combination with a NiMn2O4 anode catalyst for anion exchange membrane water electrolysis
复制标题
DOI：
10.1016/j.ijhydene.2020.01.150
复制
发表时间：
2020-03-20
影响因子：
7.2
通讯作者：
Arico, A. S.
中科院分区：
文献类型：
--
作者：
Carbone, A.;Zignani, S. Campagna;Arico, A. S.
A commercial FAA3-50 membrane was investigated as a solid polymer electrolyte in an alkaline water electrolysis. An improved chemical treatment based on alkaline KOH solution was carried out. A limited degradation of the functional groups was observed allowing to maintain a good anion conductivity approaching 55 mS cm-1 at 100 degrees C. Thermal stability up to 200 degrees C was assessed by thermal analysis.A specific membrane-electrodes assembly based on FAA3-50 anionic membrane and NiMn2O4 anode catalyst was developed and investigated in a single cell for water electrolysis at a moderate temperature (50 degrees C).Performance stability was assessed by a potential cycling-based durability test for 1000 h by varying the cell potential between 1 and 1.8 V for the FAA3-50 and NiMn2O4 based-MEA.According to this evaluation, both the FAA3-50 membrane and the NiMn2O4 catalyst appear sufficiently stable for electrolysis operation under mild operating temperatures. (C) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
