Fabrication of ideally ordered anodic porous TiO2 by anodization of pretextured two-layered metals
Fabrication of ideally ordered anodic porous TiO2 by anodization of pretextured two-layered metals
复制标题
DOI：
10.1016/j.elecom.2016.09.008
复制
发表时间：
2016-11-01
影响因子：
5.4
通讯作者：
Masuda, Hideki
中科院分区：
文献类型：
--
作者：
Kondo, Toshiaki;Nagao, Sanami;Masuda, Hideki
通过阳极氧化Al/Ti层状样品制备了理想有序的阳极多孔TiO 2。制备了由Al顶层和Ti底层组成的双层样品，然后通过纳米压印进行加工。铝顶层由于其柔软性而容易通过纳米压印预织构化，并且通过阳极氧化可以直接引入理想有序的孔排列。这种孔的排列转移到下面的Ti层，导致在理想的有序的多孔结构的TiO 2。该工艺可应用于高通量制造理想有序的阳极多孔氧化物，而不是TiO 2，也可应用于其他高硬度金属。(C)2016由Elsevier B. V.出版
Ideally ordered anodic porous TiO2 was fabricated by anodizing an Al/Ti layered specimen. A two-layered specimen composed of an Al top layer and a Ti underlying layer was prepared and then processed by nanoimprinting. The Al top layer was easily pretextured by nanoimprinting owing to its softness and it was straightforward to introduce an ideally ordered pore arrangement by anodization. This pore arrangement was transferred to the underlying Ti layer, resulting in ideally ordered porous structures in TiO2. This process can be applied to the high throughput fabrication of ideally ordered anodic porous oxides other than TiO2 and also to other metals with high hardness. (C) 2016 Published by Elsevier B.V.