Effects of cobalt additions on WC grain growth
Effects of cobalt additions on WC grain growth
复制标题
DOI：
10.1179/1743290111y.0000000009
复制
发表时间：
2012-07
影响因子：
1.4
通讯作者：
L. Zhang;S. Chen;C. Shan;X. Cheng;Y. Ma;Xiang-jun Xiong
中科院分区：
文献类型：
--
作者：
L. Zhang;S. Chen;C. Shan;X. Cheng;Y. Ma;Xiang-jun Xiong
Inhomogeneity in the particle size of the tungsten carbide raw material can result in abnormal WC grain growth in WC–Co cemented carbides. For the preparation of ultrafine tungsten carbide powders and ultrafine cemented carbides, abnormal WC grain growth is the most troublesome issue. This paper deals with the effects of cobalt additions on WC grain growth during the carburisation process of nano- and coarse tungsten powders and the sintering process of ultrafine tungsten carbide powders. For the preparation of tungsten carbide powders, it was shown that through the incorporation of 0·035 wt-%Co into W+C mixtures, a dramatic change in WC grain morphology took place for coarse tungsten raw material, while for nanotungsten raw material, a pronounced WC grain growth took place. Plate-like truncated trigonal and hexagonal WC grains were formed during the carburisation process of coarse tungsten raw material containing 0·035 wt-%Co. For the sintering of ultrafine tungsten carbide powders containing 0·3 wt-%Co, an anisotropic and abnormal WC grain growth took place. The mechanisms for WC grain growth were discussed, and suggestions were made for the quality improvement of nano- and ultrafine tungsten carbide powders and ultrafine cemented carbides.
