Widely tunable 1.5 [micro sign]m micromechanical optical filter using AlOx/AlGaAs DBR

Widely tunable 1.5 [micro sign]m micromechanical optical filter using AlOx/AlGaAs DBR
复制标题

使用 AlOx/AlGaAs DBR 的广泛可调 1.5 [microsign]m 微机械光学滤波器

DOI:
10.1049/el:19971167
复制
发表时间:
1997
影响因子:
1.1
通讯作者:
C. Chang
C. Chang
中科院分区:
工程技术4区
文献类型:
--
作者:
M. Wu;G. S. Li;W. Yuen;C. Chang

文献摘要

被引文献

相似文献

作者首次利用法布里-珀罗谐振器和 AlOx/AlGaAs 分布式布拉格反射器 (DBR) 的微机械调谐,展示了 1.55 µm 波长可调谐光学滤波器。使用热氧化 AlAs 层可产生超宽带宽,极大地提高了谐振器的调谐范围和效率。只需 0.95 V 的调谐电压即可实现 > 50 nm 的非常高效的连续调谐。调谐范围受到我们的测试激光器的限制,预计可扩展到数百纳米。
The authors demonstrate, for the first time, a wavelength tunable optical filter at 1.55 µm using micromechanical tuning of a Fabry-Perot resonator with an AlOx/AlGaAs distributed Bragg reflectors (DBR). The use of thermally oxidised AlAs layers, resulting an ultrawide bandwidth, dramatically increased the tuning range and efficiency of the resonator. Very efficient continuous tuning of > 50 nm with only a 0.95 V tuning voltage was achieved. The tuning range, limited by our test laser, is expected to be expandable to hundreds of nm.