The effect of ultraviolet C radiation against different N95 respirators inoculated with SARS-CoV-2
The effect of ultraviolet C radiation against different N95 respirators inoculated with SARS-CoV-2
复制标题
DOI:
10.1016/j.ijid.2020.08.077
复制
发表时间:
2020-11-01
影响因子:
8.4
通讯作者:
Mi, Qing-Sheng
中科院分区:
文献类型:
--
作者:
Ozog, David M.;Sexton, Jonathan Z.;Mi, Qing-Sheng
Objectives: There are currently no studies that have examined whether one dosage can be uniformly applied to different respirator types to effectively decontaminate SARS-CoV-2 on N95 filtering facepiece respirators (FFRs). Health care workers have been using this disinfection method during the pandemic. Our objective was to determine the effect of UVC on SARS-CoV-2 inoculated N95 respirators and whether this was respirator material/model type dependent.Methods: Four different locations (facepiece and strap) on five different N95 FFR models (3M 1860, 8210, 8511, 9211; Moldex 1511) were inoculated with a 10 mu L drop of SARS-CoV-2 viral stock (8 x 10(7) TCID50/mL). The outside-facing and wearer-facing surfaces of the respirators were each irradiated with a dose of 1.5 J/cm(2) UVC (254 nm). Viable SARS-CoV-2 was quantified by a median tissue culture infectious dose assay (TCID50).Results: UVC delivered using a dose of 1.5 J/cm(2), to each side, was an effective method of decontamination for the facepieces of 3M 1860 and Moldex 1511, and for the straps of 3M 8210 and the Moldex 1511.Conclusion: This dose is an appropriate decontamination method to facilitate the reuse of respirators for healthcare personnel when applied to specific models/materials. Also, some straps may require additional disinfection to maximize the safety of frontline workers. Implementation of widespread UVC decontamination methods requires careful consideration of model, material type, design, and fit-testing following irradiation. (C) 2020 Published by Elsevier Ltd on behalf of International Society for Infectious Diseases.