Study on the Corrosion Resistance of (Nd,Dy)–Fe–B Magnets Obtained by Grain Boundary Diffusion Method
Study on the Corrosion Resistance of (Nd,Dy)–Fe–B Magnets Obtained by Grain Boundary Diffusion Method
复制标题
DOI:
10.1109/tmag.2020.3033701
复制
发表时间:
2021-01
影响因子:
2.1
通讯作者:
Yujie Cao;Pengjie Zhang;Guangqing Xu;Youhao Liu;Jiaqin Liu;Yucheng Wu;Jingwu Chen;X. Yi
中科院分区:
文献类型:
--
作者:
Yujie Cao;Pengjie Zhang;Guangqing Xu;Youhao Liu;Jiaqin Liu;Yucheng Wu;Jingwu Chen;X. Yi
Nd–Fe–B sintered magnets were heat-treated in Dy vapor atmosphere for achieving (Nd,Dy)–Fe–B magnets by grain boundary diffusion (GBD). The magnetic properties, microstructure, and corrosion resistance of (Nd,Dy)–Fe–B magnets were systematically investigated. Results show that the intrinsic coercivity of magnets increases significantly after Dy diffusion. Dy atoms penetrate into the magnets through the grain boundaries, which not only increase the total amount of rare earth and widen the grain boundary but also form (Nd,Dy)2Fe14B phase with higher anisotropic field on the grain surface layer. The intrinsic coercivity $H_{\mathrm {cj}}$ of (Nd,Dy)–Fe–B magnets increases from 16.86 to 21.60 kOe. When the testing time of highly accelerated aging tester is 96 h, the weight loss of pristine Nd–Fe–B magnets is 0.436 mg/cm2, while that of (Nd,Dy)–Fe–B magnets is 1.922 mg/cm2. The results of weight loss test and potentiodynamic polarization curves show that the corrosion resistance of (Nd,Dy)–Fe–B magnets is worse than that of pristine magnets due to more rare earth amount and wider grain boundary.