Front-end system of the TPE-RX reversed-field pinch machine
Front-end system of the TPE-RX reversed-field pinch machine
复制标题
TPE-RX反场夹送机前端系统
DOI：
10.1016/s0920-3796(99)00056-3
复制
发表时间：
1999
期刊：
影响因子：
--
通讯作者：
Y. Ishigami
中科院分区：
文献类型：
--
作者：
Y. Yagi;S. Sekine;T. Shimada;A. Masiello;K. Hayase;Y. Hirano;I. Hirota;S. Kiyama;H. Koguchi;Y. Maejima;H. Sakakita;Y. Sato;K. Sugisaki;Hasegawa Mitsuru;M. Yamane;F. Sato;I. Oyabu;K. Kuno;T. Minato;A. Kiryu;S. Takagi;K. Sako;F. Kudough;K. Urata;H. Kaguchi;J. Orita;H. Sago;Y. Ishigami
描述了TPE-RX反向场夹送（RFP）机前端系统的关键设计要点。这里的前端系统是厚壳体和等离子体表面之间的机器部件，它由真空容器、壳体系统和脉冲垂直场线圈（PVC）组成。根据相对径向磁扰动来检查多层壳系统的效果。还显示了端口误差场和 PVC 产生的磁场的摘要。还描述了实际的施工过程。 TPE-RX 的建设于 1997 年 12 月底完成，目前已按 RFP 配置正常运行。
Key design points of the front-end system of TPE-RX reversed-field pinch (RFP) machine are described. Here the front-end system is the components of the machine between the thick shell and the plasma surface and it consists of the vacuum vessel, shell system and pulsed vertical field coil (PVC). The effect of the multi-layered shell system is examined in terms of the relative radial magnetic perturbation. A summary of the port error field and the magnetic field produced by the PVC are also shown. The actual construction procedure is also described. Construction of the TPE-RX was completed at the end of December 1997 and it is now routinely in operation with RFP configuration.