Design, fabrication and performance test of a fixed bed batch type pyrolysis plant with scrap tire in Bangladesh
Design, fabrication and performance test of a fixed bed batch type pyrolysis plant with scrap tire in Bangladesh
复制标题
DOI：
10.1016/j.jrras.2018.05.001
复制
发表时间：
2018-10-01
影响因子：
1.7
通讯作者：
Molla, Halim
中科院分区：
文献类型：
--
作者：
Aziz, Mohammad Abdul;Rahman, M. A.;Molla, Halim
本文介绍了固定床间歇式热解反应器的设计和建造。该反应器还用于从废轮胎生产热解油。结果表明，反应器在400 ° C的温度下以15 cm（3）的进料尺寸产生最大42wt%的热解油。生产的热解油具有4.5cSt的较高粘度和42.5MJ/kg的热值。因此，热解油不能直接用于发动机操作，而是用作锅炉操作中的炉油或燃料。该炭具有用作肥料、生产传送带和鞋类的潜力。(C)2018年埃及辐射科学与应用学会。制作和主办：Elsevier B. V.
This paper presents the design and construction of a fixed bed batch pyrolysis reactor. The reactor is further used for the production of pyro oil from scrap tire. The result shows that reactor yields a maximum pyro oil of 42 wt% at the temperature of 400 degrees C with a feed size of 15 cm(3). The produced pyro oil has a higher viscosity of 4.5 cSt and heating value of 42.5MJ/kg. Thus pyro oil cannot be used directly in engine operation but as a furnace oil or fuel in boiler operation. The char is potential for using as a fertilizer, production of conveyor belt and footwear. (C) 2018 The Egyptian Society of Radiation Sciences and Applications. Production and hosting by Elsevier B.V.