Coordination Polymer Route to Wurtzite ZnS and CdS Nanorods
Coordination Polymer Route to Wurtzite ZnS and CdS Nanorods
复制标题
DOI：
10.1006/jssc.2002.9556
复制
发表时间：
2002-06
影响因子：
5.4
通讯作者：
Zhengping Qiao;Gang Xie;J. Tao;Zhao-Yang Nie;Yan-Zhi Lin;Xiao‐Ming Chen
中科院分区：
文献类型：
--
作者：
Zhengping Qiao;Gang Xie;J. Tao;Zhao-Yang Nie;Yan-Zhi Lin;Xiao‐Ming Chen
摘要 以配位聚合物[ M (tp)(4,4′-bipy)] ∞ 在140 ℃溶剂热条件下（M = Zn，Cd）合成了纤锌矿MS纳米棒。通过 TEM 测定的形貌给出了 ZnS 和 CdS 的平均宽度/长度直径分别为 50/200 nm 和 20/75 nm。 X射线粉末衍射和XPS谱证明所制备的产物分别为纯ZnS和CdS。
Abstract Wurtzite MS nanorods were synthesized from coordination polymer [ M (tp)(4,4′-bipy)] ∞ at 140°C under solvothermal condition ( M =Zn, Cd). The morphology determined by TEM gives the average diameters of width/length as 50/200 nm and 20/75 nm for ZnS and CdS, respectively. X-ray powder diffraction and XPS spectra proved that the as-prepared products were pure ZnS and CdS, respectively.