Computer Aided Modeling and Trade-Off Analysis for Successful Amplifier Design

成功放大器设计的计算机辅助建模和权衡分析

• 批准号: 9451519
• 负责人: Harry Li
• 金额: $ 8.73万
• 依托单位: Regents of the University of Idaho
• 依托单位国家: 美国
• 项目类别: Standard Grant
• 财政年份: 1994
• 资助国家: 美国
• 起止时间: 1994-08-15 至 1997-07-31
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=9451519&HistoricalAwards=false
• 关键词: Computer; Aided; Modeling; Trade; Off

A computer is used as both a simulation and measurement tool to illustrate the behavior of analog electronic circuits. The Kolb learning cycle and the 4MAT system are used to justify the computer's role in experimentation. The incorporation of automated device parameter extraction is used to obtain more accurate computer simulations, and computer-controlled measurements illustrate design trade-off issues. Because trade-off analysis requires a large number of measurements, the computer is utilized to automatically control some of the more redundant activities. Using both simulation and automated measurement increases student understanding of amplifier circuits and bridges the gap between analysis and design.

计算机被用作模拟和测量工具来说明模拟电子电路的行为。科尔布学习周期和4MAT系统被用来证明计算机在实验中的作用。自动化设备参数提取的结合用于获得更精确的计算机模拟，计算机控制的测量说明了设计权衡问题。因为权衡分析需要大量的测量，计算机被用来自动控制一些更冗余的活动。使用模拟和自动测量增加学生对放大器电路的理解，并弥合分析和设计之间的差距。