Process combination for manufacturing of teethed, thin-walled functional components out of tailored blanks (A01)

用拼焊板制造齿状薄壁功能部件的工艺组合 (A01)

• 批准号: 116366755
• 金额: --
• 依托单位: Lehrstuhl für Fertigungstechnologie (LFT)
• 依托单位国家: 德国
• 项目类别: CRC/Transregios
• 财政年份: 2009
• 资助国家: 德国
• 起止时间: 2008-12-31 至 2019-12-31
• 项目状态: 已结题
• 来源: https://gepris.dfg.de/gepris/projekt/116366755?language=en
• 关键词: Process; combination; manufacturing; teethed; thin

Aim of the third project phase is the development and analysis of new process control strategies for the manufacturing of load optimized functional components with two-sided functional elements per-pendicular to the sheet plane. The arrangement of functional elements on both sides of the cup wall represents the further development of the existing part geometry of the first and second process phase. The tailored blanks are manufactured by a flexible rolling and an orbital forming process. The further processing is investigated in a single-step process combination of deep drawing and upset-ting.

项目第三阶段的目标是开发和分析新的工艺控制策略，用于制造具有双面功能元件的负载优化功能部件。杯壁两侧的功能元件的布置代表了第一和第二工艺阶段的现有零件几何形状的进一步发展。通过柔性轧制和轨道成形工艺制造拼焊板。采用深冲和镦粗的一步工艺组合进行进一步加工。