Collaborative Research: HIGH EFFICIENCY POWER DELIVERY AND FRONT-END MODULE DESIGN FOR IMPLANTABLE BIO-SENSORS

合作研究：植入式生物传感器的高效电力传输和前端模块设计

• 批准号: 0735481
• 负责人: Tianhong Cui
• 金额: --
• 依托单位: University of Minnesota-Twin Cities
• 依托单位国家: 美国
• 项目类别: Standard Grant
• 财政年份: 2007
• 资助国家: 美国
• 起止时间: 2007-09-01 至 2009-08-31
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=0735481&HistoricalAwards=false
• 关键词: Collaborative; Research; EFFICIENCY; POWER; DELIVERY

The I/UCRC for Advanced Technologies for Minimally Invasive Diagnosis and Treatment at the University of Minnesota and the Connection One I/UCRC at Arizona State will be collaborating on a project that focuses on fully integrated high efficiency power supply regulators and low noise analog front end circuits for battery-less implantable passive telemetry based sensors. The researchers will collaborate on diverse areas of microelectronics and bioengineering including electromagnetics, MEMS based inductors and probes, analog, mixed-signal IC design and power electronics.This collaborative project will provide a much broader university and industry experience for the researchers, students and company members. The research results will help companies design efficient, reliable power supplies that do not require batteries for implantable devices, thereby reducing the number of surgeries.

明尼苏达大学微创诊断和治疗先进技术I/UCRC和亚利桑那州的Connection One I/UCRC将合作开展一个项目，重点是完全集成的高效电源调节器和低噪声模拟前端电路，用于无电池植入式无源遥测传感器。 研究人员将在微电子和生物工程的不同领域进行合作，包括电磁学，基于MEMS的电感器和探针，模拟，混合信号IC设计和电力电子。这个合作项目将为研究人员，学生和公司成员提供更广泛的大学和行业经验。 研究结果将帮助公司设计高效、可靠的电源，不需要植入式设备的电池，从而减少手术次数。