SIMPPL - Simulation of the motion behaviour of filled parcels and load carriers in bulk mode

SIMPPL - 散装模式下填充包裹和负载载体运动行为的仿真

• 批准号: 281353435
• 负责人: Professor Dr.-Ing. Andrè Katterfeld
• 金额: --
• 依托单位: Institut für Logistik und Materialflusstechnik (ILM)
• 依托单位国家: 德国
• 项目类别: Research Grants
• 财政年份: 2015
• 资助国家: 德国
• 起止时间: 2014-12-31 至 2018-12-31
• 项目状态: 已结题
• 来源: https://gepris.dfg.de/gepris/projekt/281353435?language=en
• 关键词: SIMPPL; Simulation; motion; behaviour; filled

The aim of the project is the development of a calculation method for the analysis of the motion behaviour of freely movable multi body systems under the consideration of inner and outer contacts. The multi body system is understood as a pile of filled parcels or load carriers which should be separated and transported by a conveying system. The simulation method should allow the prediction of the load acting on goods in its packaging or in its load carriers depending on the forces occurring during the transport process. To reach this aim, it is necessary to develop algorithms and implement them in a existing DEM software (LIGGGHTS). The developed method should be validated by experimental tests on a material handling test plant.With this research a contribution is made to predict the damaging of goods in their packaging during the transport in bulk mode. The increased understanding of the good damaging process would allow the optimisation of the conveying systems.

该项目的目的是开发一种计算方法，用于分析考虑内外接触的自由移动多体系统的运动行为。多体系统被理解为一堆装满的包裹或负载载体，它们应该被输送系统分离和运输。模拟方法应允许根据运输过程中出现的力预测作用在包装或承载器中的货物上的载荷。为了达到这一目标，有必要开发算法，并在现有的DEM软件（LIGGSTOM）中实现它们。所开发的方法应通过实验测试的材料处理测试plant.With这项研究的贡献，预测在散装模式运输过程中的货物包装损坏。对良好的破坏过程的了解的增加将允许输送系统的优化。