Fabrication of magnesium/calcium phosphate lamellar composite
镁/磷酸钙层状复合材料的制备
基本信息
- 批准号:20K05132
- 负责人:
- 金额:$ 2.75万
- 依托单位:
- 依托单位国家:日本
- 项目类别:Grant-in-Aid for Scientific Research (C)
- 财政年份:2020
- 资助国家:日本
- 起止时间:2020-04-01 至 2024-03-31
- 项目状态:已结题
- 来源:
- 关键词:
项目摘要
生体内分解性および優れた生体適合性のみならず、生体組織類似の異方性構造を有し、生体組織と高い親和性を発揮しうるマグネシウム/リン酸カルシウム複合材の創製を目指し、本研究ではマグネシウム/リン酸カルシウム積層複合材の創製およびその機能制御を試みる。本年度は、マグネシウム/ハイドロキシアパタイト積層複合材を作製し、詳細な微細組織観察を試みた。湿式法を通じて得られたハイドロキシアパタイトを被覆したマグネシウム材の熱間接合において本複合材の母材の結晶粒径は、圧下率の上昇および強化材であるハイドロキシアパタイトの体積率にともない単調に増加した。また、強化材であるハイドロキシアパタイトの体積率の上昇にともない、底面集合組織は弱化する傾向が認められた。ただし、その結晶粒径と複合材の底面集合組織の変化量は比較的小さく、複合化およびハイドロキシアパタイトの体積率に依存した強度の上昇は、リン酸カルシウムの存在によるものが大きいと考えられる。
The aim of this study is to provide guidance for the creation of organic/inorganic composite materials, and to test the functional control of organic/inorganic composite materials. This year, the production of laminated composite materials and detailed microstructure inspection were tested. The wet method is used to obtain the crystal particle size of the base material, the increase of the pressure ratio, and the increase of the volume ratio of the strengthening material. The increase in the volume fraction of the strengthening material and the weakening of the bottom aggregate tissue are recognized. The crystal particle size and the amount of change in the aggregate structure of the bottom surface of the composite material are relatively small, and the volume ratio of the composite material depends on the increase in strength and the existence of the composite material.
项目成果
期刊论文数量(3)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
Effect of Grain Refinement on Fatigue Properties of Mg–0.3 at%Ca Alloy in Air and Simulated Body Fluid
晶粒细化对 Mg-0.3 at%Ca 合金在空气和模拟体液中疲劳性能的影响
- DOI:10.2320/matertrans.mt-m2021186
- 发表时间:2022
- 期刊:
- 影响因子:1.2
- 作者:Naoko Ikeo;Naoya Kawamura;Toshiji Mukai
- 通讯作者:Toshiji Mukai
Evaluation of mechanical properties and bio-degradability in magnesium/calcium phosphate lamellar composite
镁/磷酸钙层状复合材料的机械性能和生物降解性评价
- DOI:
- 发表时间:2021
- 期刊:
- 影响因子:0
- 作者:NAOKO IKEO;Yuka Yamashita;Kana NAKANO;Toshiji MUKAI
- 通讯作者:Toshiji MUKAI
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
数据更新时间:{{ journalArticles.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ monograph.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ sciAawards.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ conferencePapers.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ patent.updateTime }}
池尾 直子其他文献
Hydroxyapatite Dispersed Magnesium-Based Composite Produced from Pulverized Magnesium Alloy Powder and Its Mechanical Properties
镁合金粉制备羟基磷灰石分散镁基复合材料及其力学性能
- DOI:
10.2320/jinstmet.j2017036 - 发表时间:
2018 - 期刊:
- 影响因子:0.5
- 作者:
渡辺 博行;元山 高嶺;池尾 直子;向井 敏司 - 通讯作者:
向井 敏司
水酸アパタイト分散マグネシウム合金基複合材料の組織と機械的特性
羟基磷灰石分散镁合金基复合材料的显微组织与力学性能
- DOI:
- 发表时间:
2017 - 期刊:
- 影响因子:0
- 作者:
渡辺 博行;元山 高嶺;池尾 直子;向井 敏司 - 通讯作者:
向井 敏司
生分解性マグネシウム合金の骨固定用デバイスへの応用 -動物実験モデルにおける 手術手技での実用性評価-
可生物降解镁合金在骨固定装置中的应用-动物实验模型中手术技术的实用性评价-
- DOI:
- 发表时间:
2017 - 期刊:
- 影响因子:0
- 作者:
三浦千絵子;佐藤顕光;今井啓道;館 正弘;清水良央;佐野 有哉;向井敏司;池尾 直子;山本玲子;磯崎 修二;高橋 泰 - 通讯作者:
高橋 泰
非鉄金属の蛍光X線分析-Fundamental Parameter法による定量分析,および半定量分析-
有色金属的荧光 X 射线分析 - 使用基本参数方法进行定量和半定量分析 -
- DOI:
- 发表时间:
2017 - 期刊:
- 影响因子:0
- 作者:
渡辺 博行;元山 高嶺;池尾 直子;向井 敏司;渡辺 博行 - 通讯作者:
渡辺 博行
池尾 直子的其他文献
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
{{ truncateString('池尾 直子', 18)}}的其他基金
マグネシウム合金のin vitro疲労特性に対するカルシウム濃度の影響
钙浓度对镁合金体外疲劳性能的影响
- 批准号:
23K19182 - 财政年份:2023
- 资助金额:
$ 2.75万 - 项目类别:
Grant-in-Aid for Research Activity Start-up
新規構造体の創製による金属インプラント力学機能の生体模倣化
通过创建新结构来仿生金属植入物机械功能
- 批准号:
11J00289 - 财政年份:2011
- 资助金额:
$ 2.75万 - 项目类别:
Grant-in-Aid for JSPS Fellows
相似海外基金
The next steps for commercial readiness: PlantSea Pods (a novel seaweed-based biodegradable material)
商业准备的下一步:PlantSea Pods(一种新型海藻基可生物降解材料)
- 批准号:
10072152 - 财政年份:2023
- 资助金额:
$ 2.75万 - 项目类别:
Collaborative R&D
A biodegradable material made from fibre and starch that can be used to replace single-use plastics in food packaging and healthcare products
由纤维和淀粉制成的可生物降解材料,可用于替代食品包装和保健产品中的一次性塑料
- 批准号:
10035775 - 财政年份:2022
- 资助金额:
$ 2.75万 - 项目类别:
Collaborative R&D
RUI: Leaf as a Biodegradable Material for Electronic Components
RUI:叶子作为电子元件的可生物降解材料
- 批准号:
2203157 - 财政年份:2022
- 资助金额:
$ 2.75万 - 项目类别:
Standard Grant
Reducing Microfibre Ocean Plastic Pollution by Biodegradable Material Substitution
通过可生物降解材料替代减少微纤维海洋塑料污染
- 批准号:
105403 - 财政年份:2019
- 资助金额:
$ 2.75万 - 项目类别:
Collaborative R&D
Development of a biodegradable material with controlled release of growth factors: Application for a preclinical model
开发具有控制释放生长因子的生物可降解材料:临床前模型的应用
- 批准号:
16K11658 - 财政年份:2016
- 资助金额:
$ 2.75万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
Development of novel elastic biodegradable material for improve cardiac function with regenerating cardiomyocytes post myocardial infarction
开发新型弹性可生物降解材料,通过心肌梗塞后再生心肌细胞来改善心脏功能
- 批准号:
26462086 - 财政年份:2014
- 资助金额:
$ 2.75万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
Development of a biodegradable material with controlled release of growth factors for jaw reconstruction
开发一种可生物降解的材料,可控制释放生长因子,用于颌骨重建
- 批准号:
25463054 - 财政年份:2013
- 资助金额:
$ 2.75万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
GOALI: Implementation of Biodegradable Material Models in ANSYS
目标:在 ANSYS 中实施可生物降解材料模型
- 批准号:
1067750 - 财政年份:2011
- 资助金额:
$ 2.75万 - 项目类别:
Standard Grant
Development of radiolucent biodegradable material for sinus floor bone augmentation
开发用于窦底骨增量的射线可透过的生物可降解材料
- 批准号:
22659355 - 财政年份:2010
- 资助金额:
$ 2.75万 - 项目类别:
Grant-in-Aid for Challenging Exploratory Research
Development of a biodegradable material for biomedical applications
开发用于生物医学应用的可生物降解材料
- 批准号:
304403-2004 - 财政年份:2006
- 资助金额:
$ 2.75万 - 项目类别:
Postgraduate Scholarships - Doctoral