Improvement of fatigue strength and non-damaging of surface defects in 3D additive manufactured metals by laser peening

通过激光喷丸提高 3D 增材制造金属的疲劳强度和不损坏表面缺陷

基本信息

  • 批准号:
    19H02022
  • 负责人:
  • 金额:
    $ 11.32万
  • 依托单位:
  • 依托单位国家:
    日本
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
  • 财政年份:
    2019
  • 资助国家:
    日本
  • 起止时间:
    2019-04-01 至 2022-03-31
  • 项目状态:
    已结题

项目摘要

项目成果

期刊论文数量(10)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
Improving Fatigue Limit and Rendering Defects Harmless through Laser Peening in Additive-Manufactured Maraging Steel
通过激光喷丸提高增材制造的马氏体时效钢的疲劳极限并消除缺陷
  • DOI:
    10.3390/met12010049
  • 发表时间:
    2022
  • 期刊:
  • 影响因子:
    2.9
  • 作者:
    Shiori Tsuchiya;Koji Takahashi
  • 通讯作者:
    Koji Takahashi
Influence of Laser Peening on the Fatigue Strength of 3D Additive Manufactured Maraging Steel
激光喷丸对 3D 增材制造马氏体时效钢疲劳强度的影响
レーザピーニングによるアルミニウム合金の疲労強度改善
激光喷丸提高铝合金疲劳强度
  • DOI:
  • 发表时间:
    2020
  • 期刊:
  • 影响因子:
    0
  • 作者:
    Shiori Tsuchiya;Koji Takahashi;土屋詩織,高橋宏治;Koji Takahashi Yuta Kogishi Norihito Shibuya Fumiaki Kumeno;小岸 優太,高橋 宏治,角谷 利恵,千田 格
  • 通讯作者:
    小岸 優太,高橋 宏治,角谷 利恵,千田 格
Effects of laser peening on the fatigue strength and defect tolerance of aluminum alloy
3D積層造形したアルミニウム合金の疲労強度に及ぼすショットピーニングの影響
喷丸对3D增材制造铝合金疲劳强度的影响
  • DOI:
  • 发表时间:
    2020
  • 期刊:
  • 影响因子:
    0
  • 作者:
    Shiori Tsuchiya;Koji Takahashi;土屋詩織,高橋宏治;Koji Takahashi Yuta Kogishi Norihito Shibuya Fumiaki Kumeno;小岸 優太,高橋 宏治,角谷 利恵,千田 格;金子 恵理,高橋 宏治
  • 通讯作者:
    金子 恵理,高橋 宏治
{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

数据更新时间:{{ journalArticles.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ monograph.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ sciAawards.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ conferencePapers.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ patent.updateTime }}

Takahashi Koji其他文献

弱酸性溶液中でのアクチノイドイオンの酸化還元
弱酸性溶液中锕系离子的氧化还原
  • DOI:
  • 发表时间:
    2012
  • 期刊:
  • 影响因子:
    0
  • 作者:
    Sugawara Shuhei;Atsumi Kohei;Yamaguchi Tomoki;Saigusa Mikio;Oda Yasuhisa;Takahashi Koji;Kajiwara Ken;Sakamoto Keishi;北辻章浩,間柄正明,木村貴海,木原壯林;北辻章浩,間柄正明,木村貴海,木原壯林
  • 通讯作者:
    北辻章浩,間柄正明,木村貴海,木原壯林
From Yayoi grave to mounded tomb in Hokuriku region
从弥生坟墓到北陆地区的土坟
  • DOI:
  • 发表时间:
    2005
  • 期刊:
  • 影响因子:
    0
  • 作者:
    高橋 重雄;井上 孝;三條 和博;高橋 朋一編著;黒崎 直;高橋 浩二;高橋 浩二;Kurosaki Tadashi;Takahashi Koji;Takahashi Koji;高橋 浩二;高橋 浩二;高橋 浩二;Takahashi Koji
  • 通讯作者:
    Takahashi Koji
臨床検査学教育における客観的臨床能力試験の有用性
客观临床能力测试在临床实验室教育中的作用
  • DOI:
  • 发表时间:
    2019
  • 期刊:
  • 影响因子:
    0
  • 作者:
    Seki Masahiko;Sato Makoto;Takiwaki Masaki;Takahashi Koji;Kikutani Yoshikuni;Satoh Mamoru;Nomura Fumio;Kuroda Yutaka;Fukuzawa Seketsu;服部 圭一朗; 會田 雄一; 山内 一由; 二宮 治彦
  • 通讯作者:
    服部 圭一朗; 會田 雄一; 山内 一由; 二宮 治彦
Dynamic interplay between interfacial nanobubbles: oversaturation promotes anisotropic depinning and bubble coalescence
界面纳米气泡之间的动态相互作用:过饱和促进各向异性脱钉和气泡聚结
  • DOI:
    10.1039/d1cp03451k
  • 发表时间:
    2021
  • 期刊:
  • 影响因子:
    3.3
  • 作者:
    Nag Sarthak;Tomo Yoko;Teshima Hideaki;Takahashi Koji;Kohno Masamichi
  • 通讯作者:
    Kohno Masamichi
In-situ observation of nanoscale bubble behavior induced by damage of graphene liquid cells
石墨烯液体细胞损伤引起的纳米级气泡行为的原位观察
  • DOI:
  • 发表时间:
    2021
  • 期刊:
  • 影响因子:
    0
  • 作者:
    Hirokawa Sota;Teshima Hideaki;Solis-Fernandez Pablo;Ago Hiroki;Li Qin-Yi;Takahashi Koji
  • 通讯作者:
    Takahashi Koji

Takahashi Koji的其他文献

{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

{{ truncateString('Takahashi Koji', 18)}}的其他基金

Modification of auxin receptors and mechanism of acid growth
生长素受体的修饰和酸生长机制
  • 批准号:
    20K06685
  • 财政年份:
    2020
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Reflectance Change in Cenozoic vitrinite: Estimation for the maximum paleo-temperature of Cenozoic geologic units
新生代镜质体反射率变化:新生代地质单元最高古温度的估算
  • 批准号:
    19K14807
  • 财政年份:
    2019
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Early-Career Scientists
Archaeological study of migration along the Sea of Japan coastal route from perspective of diffusion of posthole-type buildings with nunoboribashira pit or hole for construction
从带有布堀柱坑或施工孔的柱坑型建筑扩散角度对沿日本海沿岸迁徙的考古研究
  • 批准号:
    18K01059
  • 财政年份:
    2018
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Measurement techniques for thermophysical properties of low-dimensional materials for next-generation electronics
下一代电子产品低维材料热物理特性的测量技术
  • 批准号:
    17H03186
  • 财政年份:
    2017
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
Live-imaging of PM H+-ATPase activity
PM H -ATP酶活性的实时成像
  • 批准号:
    17K07443
  • 财政年份:
    2017
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Nanoscale Observation of Liquid-Gas Phase Change Using Transmission Electron Microscopy
使用透射电子显微镜纳米级观察液-气相变
  • 批准号:
    16K14174
  • 财政年份:
    2016
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Challenging Exploratory Research
Magmatic eruptions and phreatic eruptions: Development of remote sensing using water vapor isotopic composition in volcanic plume
岩浆喷发和潜水喷发:利用火山羽流中水蒸气同位素组成遥感的发展
  • 批准号:
    15H06264
  • 财政年份:
    2015
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Research Activity Start-up
Multidimensional evaluation of heat conduction in carbon materials by using nanoscale thermal experiments
利用纳米级热实验对碳材料的导热进行多维评估
  • 批准号:
    26289047
  • 财政年份:
    2014
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
Development of in-liquid scanning thermal microscopy
液体扫描热显微镜的发展
  • 批准号:
    26630067
  • 财政年份:
    2014
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Challenging Exploratory Research
Improvement wear properties of ceramics by shot-peening and crack-healing
通过喷丸和裂纹修复改善陶瓷的磨损性能
  • 批准号:
    25289003
  • 财政年份:
    2013
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)

相似海外基金

マルチ集光スポットレーザ照射による金属の深層レーザピーニング処理
多焦点激光照射对金属进行深度激光喷丸处理
  • 批准号:
    22K03815
  • 财政年份:
    2022
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Development of nano-coating film using laser peening and evaluation of tribo performance
激光喷丸纳米涂层薄膜的开发及摩擦性能评价
  • 批准号:
    21K03837
  • 财政年份:
    2021
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Microstructural modification and fatigue reliability improvement of flame-retardant Mg alloy FSW joints by shock waves generated by a pulsed laser
脉冲激光产生的冲击波对阻燃镁合金 FSW 接头的微观结构改性和疲劳可靠性提高
  • 批准号:
    20K05109
  • 财政年份:
    2020
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Effect of laser pulse duration on residual stress generation and fatigue strength in laser peening
激光脉冲持续时间对激光喷丸残余应力产生和疲劳强度的影响
  • 批准号:
    19H02228
  • 财政年份:
    2019
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
Improvement of reliability of ceramics by laser peening and crack-healing
通过激光喷丸和裂纹修复提高陶瓷的可靠性
  • 批准号:
    16H04231
  • 财政年份:
    2016
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
Maintenance of fatigue damaged friction stir welding joints by laser peening and integrity evaluation with synchrotron radiation laminography
通过激光喷丸维护疲劳损伤的搅拌摩擦焊接头并通过同步辐射断层扫描进行完整性评估
  • 批准号:
    16K06761
  • 财政年份:
    2016
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Development of femtosecond laser peening technique for improving mechanical properties
开发飞秒激光喷丸技术以提高机械性能
  • 批准号:
    16H04247
  • 财政年份:
    2016
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
Confirmatory experiments on enhancement of fatigue lives for development of portable laser-peening system
开发便携式激光喷丸系统提高疲劳寿命的验证性实验
  • 批准号:
    26420468
  • 财政年份:
    2014
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Improvement of fatigue property by laser peening and investigation of fatigue fracture mechanism with synchrotron radiation on friction stir welding joints
激光喷丸改善搅拌摩擦焊接头疲劳性能及同步辐射疲劳断裂机理研究
  • 批准号:
    25420741
  • 财政年份:
    2013
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Local modification of thin film metal by laser peening
通过激光喷丸对薄膜金属进行局部改性
  • 批准号:
    24760070
  • 财政年份:
    2012
  • 资助金额:
    $ 11.32万
  • 项目类别:
    Grant-in-Aid for Young Scientists (B)
{{ showInfoDetail.title }}

作者:{{ showInfoDetail.author }}

知道了