Development of hybrid deep drawing tools of high wear resistance with an adaptive tool stiffness (C01)

TP C1涉及用于热冲压和冷成形的混合工具的开发。因此，使用了两种不同的策略。成形工具应通过铸造或烧结来生产。陶瓷，这可能是用于这些战略，将其特点。在工具中集成功能元件后，将进行零件的热冲压，特别是用于生产具有分级材料性能的零件。在本项目范围内，还将对这些工具进行寿命分析，并与SFB制造的钢制工具进行比较。

TP C1 deals with the development of hybrid tools for the use in hot stamping and in cold forming. Therefore two different strategies are used. The forming tools should be produced by casting or by sintering. Ceramics, which can be possibly used for these strategies, will be characterized. After the integration of functional elements in the tools, hot stamping of parts will be carried out, especially for the production of parts with graded material properties. The lifetime analysis of these tools and the comparison with the steel tools made in SFB would also be carried out in the scope of this project.