Pulse voltage electropolishing of micro-textured surface fabricated by selective laser melting in deep eutectic solvents

采用不同的激光条件，如扫描速度、舱口距离、扫描间隔和激光功率，对铝样品进行了增材制备。研究了不同激光条件对电抛光表面的影响。结果表明，激光功率对电抛光表面质量的影响至关重要。这是因为最终的抛光表面与最初的表面质量密切相关，而最初的表面质量主要取决于所施加的激光功率。

Aluminum samples were additive manufactured with different laser conditions, such as the scan speed, hatch distance, scan interval, and laser power. The effects of various laser conditions on the electropolished surface were studied. It was found that the laser power was of critical importance for the electropolished surface quality. This is because the final polished surface is closely related to the initial surface quality which was mainly determined by the applied laser power.