Automated re-contouring of fan blades (T04#)

在转移项目的范围内，儿童权利委员会关于压缩机叶片重新轮廓的自动规划的调查结果被转移到风扇叶片的重新轮廓，同时考虑到个别目标形状。为此，推广了子项目C1中的自动规划算法，重点研究了单个目标形状的确定、考虑局部余量的刀具路径的自动适应以及几何仿真模型的传递。该工具用于确定工艺控制变量对尺寸精度的影响。为此，将试验系列内的模拟工艺参数与实际形状进行比较。这导致了一套用于重新配置的规则，这些规则与自动计划算法一起集成到当前的修复过程中。

Within the scope of the transfer project, the findings from CRC with regard to the automated planning of the re-contouring of compressor blades are transferred to the re-contouring of fan blades, taking into account an individual target shape. For this purpose, the automated planning algorithm from subproject C1 is generalized, focusing on the determination of an individual target shape, the automated adaptation of the tool path taking into account the local allowances and the transfer of the geometric simulation model. This tool is used to determine the influence of process control variables on dimensional accuracy. For this purpose, the simulated process parameters within a test series are compared with the with the actual shape. This results in a set of rules for re-conturing which is integrated into the current repair process in conjunction with the automated planning algorithm.