A Developmental Study for Occlusal Diagnosis System in Reference to Intercuspal Position
A Developmental Study for Occlusal Diagnosis System in Reference to Intercuspal Position
批准号:
06454559
负责人:
AOKI Hideo
金额:
$4.35万
依托单位:
依托单位国家:
日本
项目类别:
Grant-in-Aid for General Scientific Research (B)
财政年份:
1994
资助国家:
日本
项目状态:
已结题
起止时间:
1994 至 1995
中文摘要
所获得的相关信息不仅有助于口颌生理和功能障碍的检查和诊断,而且可用于义齿矫治器的制作。因此,我司在过去几年中一直在这一主要课题上进行研究,这些研究得到了日本文部科学省资助的如下方式的支持;1:1987-1988(一般研究B)学科编号62480399 2:1990-1991(一般研究C)学科编号02670879 3:1989(促进研究A),学科编号01771683,4:1993(促进研究A)学科编号05771744。因此,三大…更多的研究内容如下:1.HR型SGG分析系统的研制。以前的系统III可以三维显示牙齿滑动表面,但由于磁铁附着在受试者下切牙上的特性,也会出现一些变形。初步研究证明,新型HR具有更好的稳定性和改进的传感器框架,以减少牙齿滑动面的变形。CADIAX系统的基础研究。CADIAX使记录髁突的三维运动成为可能,有助于为口腔颌面系统的功能诊断提供客观的评价。然而,与CADIAX系统相关的计算机轴测仪的测量精度几乎没有信息。我们的实验得出如下结论:电子旗帜的测量精度因其位置而异,其值约在3 mm以内。2:在0.07 mm范围内,无论收缩程度如何,电子触针的测量精度都是一致的。3:咬合诊断系统的建立,使下颌骨形态分析系统作为前导信息和CADIAX系统作为后导信息的应用成为可能。较少
英文摘要
The pertinent informations obtained for functional evaluation of the mnadibular and condylar movements are not only useful for examination and diagnosis of stomatognathic physiology and dysfunction but also applicabable to the construction of prosthetic appliances. Therefore, our department has been conducted in this primary subject during past years and these studies were supported by Grant-in-Aids from Ministry of Education, Science and Culture of Japan as in the following manner ; 1 : 1987-1988 (General Study B) Subject No.62480399,2 : 1990-1991 (General Study C) Subject No.02670879,3 : 1989 (Promotion Study A), Subject No.01771683,4 : 1993 (Promotion Study A) Subject No.05771744.Present study is a continued research project from above subjects and it's objective is to clarify the correlation of informations from the Sirognathograph Analyzing System for anterior guidance, whereas CADIAX for posterior guidance resulting from mandibular and condylar movements. Consequently, three majo … More r studies were conducted as follows.1. Developement of SGG Analyzing System with HR type.Previous system III could be displayd tooth gliding surfaces in three dimensionally, but some distortions were also occured due to the characteristics of magnet attached to subjects lower incisors. Pilot study proved that a new type HR showed better stability and improved sensor frame in order to reduce the distortions on the tooth gliding surfaces.2. Fundamental study of CADIAX system.CADIAX makes it possible record the three dimentional movements of condyles which contribute to the objective assesment for functional diagnosis in stomatognathic system. However, there were practically no informations on the measurement accuracy of the computerized Axiograph related to CADIAX system.Our experiments conclude 1 : Measurement accuracy of the electronic flag varied depending on its site and its values were recouded approximately within 3mm. 2 : Measurement accuracy of the electronic stylus was homogenous regardless of the degree of contraction within 0.07mm.3 : Establishment of Occlusal Diagnosis System.Present study made possible to connect the application of Sirognathograph Analyzing System and as anterior guidance information, and CADIAX system as posterior guidance one. Less
期刊论文(26)
专著(0)
科研奖励(0)
会议论文
登录
查看更多内容
木本 克彦: "咀嚼運動における咬頭嵌合位付近経路に関する研究" 日本補綴歯科学会雑誌. 39. 579-589 (1995)
Katsuhiko Kimoto:“咀嚼运动期间牙尖间位置周围路径的研究”日本修复医学会杂志 39. 579-589 (1995)。
DOI:
--
发表时间:
期刊:
影响因子:
--
作者:
[]
通讯作者:
Satoshi Ino: "An Experimental Study on the Measurrement Accuracy of the Computerizes Axiography" The Bulletin of Kanagawa Dental College. 23. 93-97 (1995)
Satoshi Ino:“计算机轴写法测量精度的实验研究”神奈川牙科学院通报。
DOI:
--
发表时间:
期刊:
影响因子:
--
作者:
[]
通讯作者:
Katsuhiko Kimoto: "A Study on Pathway in Area of Intercuspal Position during Chewing Movements" The Journal of the Japan Prosthodontic Society. 39. 579-589 (1995)
Katsuhiko Kimoto:“咀嚼运动期间牙尖间位置区域的路径研究”日本修复学会杂志。
DOI:
--
发表时间:
期刊:
影响因子:
--
作者:
[]
通讯作者:
Yukari Endo: "Recording Accuracy of Tooth Gliding Surfaces Using Sirognathograph Analyzing System III" The Bulletin of Kanagawa Dental College. 23. 99-100 (1995)
Yukari Endo:“使用 Sirognathograph 分析系统 III 记录牙齿滑动表面的精度”神奈川牙科学院通报。
DOI:
--
发表时间:
期刊:
影响因子:
--
作者:
[]
通讯作者:
玉置勝司: "歯牙接触滑走曲面と咀嚼運動経路に関する三次元的表示法の検討" 日本補綴歯科学会雑誌. 39. 111-112 (1995)
Katsuji Tamaki:“牙齿接触滑动表面和咀嚼运动路径的三维表示的研究”日本修复医学会杂志 39. 111-112 (1995)。
DOI:
--
发表时间:
期刊:
影响因子:
--
作者:
[]
通讯作者:
共 8 条
Materials design and fabrication of new superconductors based on choice of elements and band structure control
-
批准号:22340093
-
项目类别:Grant-in-Aid for Scientific Research (B)
-
资助金额:$12.4万
-
财政年份:2010
-
负责人:AOKI Hideo
-
依托单位:
Fabrication of high-Tc superconductors based on novel materials designs
-
批准号:16076203
-
项目类别:Grant-in-Aid for Scientific Research on Priority Areas
-
资助金额:$73.41万
-
财政年份:2004
-
负责人:AOKI Hideo
-
依托单位:
Strongly correlated phases arising from spin and layr degrees of freedom in the fractional quantum Hall system
-
批准号:06640500
-
项目类别:Grant-in-Aid for General Scientific Research (C)
-
资助金额:$0.9万
-
财政年份:1994
-
负责人:AOKI Hideo
-
依托单位:
A Developmental Study of Occlusal Examination System
-
批准号:02670879
-
项目类别:Grant-in-Aid for General Scientific Research (C)
-
资助金额:$1.09万
-
财政年份:1990
-
负责人:AOKI Hideo
-
依托单位: