ひずみ経路制御繰返し三軸・平面ひずみ試験と大ひずみ構成式
应变路径控制循环三轴/平面应变试验及大应变本构方程
基本信息
- 批准号:06660302
- 负责人:
- 金额:$ 1.34万
- 依托单位:
- 依托单位国家:日本
- 项目类别:Grant-in-Aid for General Scientific Research (C)
- 财政年份:1994
- 资助国家:日本
- 起止时间:1994 至 无数据
- 项目状态:已结题
- 来源:
- 关键词:
项目摘要
従来の応力経路制御法と異なるひずみ経路制御試験システムとその試験法を確立した。特に、一軸位置決めテーブルを応用したディジタル圧力体積制御ポンプDPVCはコンパクトで制御能力も高く、極めて有効であることが確認できた。また高精度計測用動ひずみ測定器も高精度のひずみ計測制御に極めて有用であった。豊浦標準砂を用いた試験の結果、三軸・平面ひずみ試験ともに、大ひずみ領域においても供試体内のひずみ分布は均一性を保持できることを局部ひずみ分布から確認した。この理由は積極的なひずみ経路制御によるものと解釈できた。なお、局部ひずみ分布計測は、ゴムスリーブに格子状のマークを描き、ビデオカメラで計測して画像処理により解析した。両試験における真の排水試験(ゼロ過剰間隙水圧)および真の非排水試験(メンブレン貫入補正)を提案し、従来の排水・非排水試験結果と比較して、供試体内のひずみ分布の違いにより体積変化量やピーク応力が異なることを明らかにした。特に両試験とも、排水試験時のピーク応力は前者の方が後者よりも約10%小さいことが判明した。さらに、シルト質粘土である藤の森粘土によるひずみ経路制御三軸試験と砂質土の繰返し試験を試み、多少の困難をともなうもののほぼ良好な結果を得た。本システムでの繰返し周波数の限界はは0.05Hz程度であった。今後はさらに、これらの結果を定量化して大ひずみ時の真の挙動に適合する上の構成式に発展させるとともに、中空ねじり試験などのより一般適応力状態が再現できる試験に適用しようと考えている。
Let's see how to make sure that the road system is established. In particular, you can use your strength to control your DPVC. Your ability to control is very high, and you can make sure you have it. The use of high-precision dynamic tester is very useful in the measurement of high-precision equipment. The Pu standard is used to verify the results of the test results, the three-dimensional distribution results, and the field data for testing the uniformity of the distribution in the body to maintain the local distribution. The reason for this is that there is an active way to control the situation and solve the problem. The picture is drawn, the picture is calculated, the picture is analyzed, and the picture is analyzed. In this paper, the author points out that the proposed proposal and the results of the proposed non-drainage system are very important in the field of sewerage management. In this case, the pressure of the former is about 10% lower than that of the drainage system. In order to improve the quality of the clay, the Fujimori clay, the Fujimori clay, the sand, the sand, the clay, the Fujimori clay, the sand, the clay, the Fujimori clay, the Fujimori clay, the sand, the clay, the clay This is the first time to return to the limit of the number of waves and the degree of 0.05Hz. In the future, the results of the test and the results of the quantitative analysis of the results show that the real system is in the mode of operation, and the air conditioner is in the middle of the air. in the future, the results show that in the future, the results of the quantitative analysis and the results of the quantitative analysis of the results show that the system is in the mode of operation.
项目成果
期刊论文数量(0)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
数据更新时间:{{ journalArticles.updateTime }}
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
数据更新时间:{{ journalArticles.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ monograph.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ sciAawards.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ conferencePapers.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ patent.updateTime }}
内田 一徳其他文献
内田 一徳的其他文献
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
{{ truncateString('内田 一徳', 18)}}的其他基金
ひずみ経路制御K_0圧密時の構造変化の検討による洪積粘土異常沈下現象の原因究明
通过应变路径控制K_0固结过程中的结构变化研究洪积粘土异常沉降的原因
- 批准号:
02F00343 - 财政年份:2002
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for JSPS Fellows
異方透水性の発現メカニズムと異方浸透流特性に関する研究
各向异性渗透率及各向异性流动特性机理研究
- 批准号:
09876061 - 财政年份:1997
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Exploratory Research
平面ひずみ試験による初期液状化後の砂の強度・変形特性の解明とそのモデル化
使用平面应变试验及其建模阐明初始液化后砂的强度和变形特征
- 批准号:
61560264 - 财政年份:1986
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for General Scientific Research (C)
コンピュータ制御繰返し平面歪試験によるフィルダム材料の動的な強度変形特性の研究
计算机控制循环平面应变试验研究填坝材料动态强度变形特性
- 批准号:
57560230 - 财政年份:1982
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for General Scientific Research (C)
AEのエネルギー計測と土の変形特性との対応に関する研究
声发射能量测量与土体变形特征对应关系研究
- 批准号:
X00210----576138 - 财政年份:1980
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Encouragement of Young Scientists (A)
相似海外基金
凍結機構を有する侵食型三軸試験機を用いた内部侵食による土の脆弱化メカニズムの解明
使用具有冻结机构的侵蚀型三轴试验机阐明内部侵蚀引起的土壤弱化机制
- 批准号:
23K19151 - 财政年份:2023
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Research Activity Start-up
Development of a three-phase coupled finite deformation analysis method based on effective saturation degree and validation by unsaturated triaxial test
基于有效饱和度的三相耦合有限变形分析方法的开发及非饱和三轴试验验证
- 批准号:
17K14720 - 财政年份:2017
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Young Scientists (B)
High pressure / High Temperature Geomechanical Triaxial Test Cell with Integrated Pore Pressure Monitoring and Acoustic and Strain Transducer Arrays
具有集成孔隙压力监测以及声学和应变传感器阵列的高压/高温地质力学三轴测试单元
- 批准号:
422900-2012 - 财政年份:2011
- 资助金额:
$ 1.34万 - 项目类别:
Research Tools and Instruments - Category 1 (<$150,000)
Development of down-hole triaxial test method to evaluate characteristics of gas hydrate layers
开发评价天然气水合物层特征的井下三轴测试方法
- 批准号:
20360209 - 财政年份:2008
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
コーン貫入抵抗と液状化強度の同時測定三軸試験法の開発
同时测量锥入阻力和液化强度的三轴试验方法的研制
- 批准号:
18760363 - 财政年份:2006
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Young Scientists (B)
Observation of bifurcation of geomaterial in 3-D conditions through triaxial test using rectangular specimens
通过使用矩形样本的三轴试验观察三维条件下岩土材料的分叉
- 批准号:
13650540 - 财政年份:2001
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
多機能三軸試験装置の開発と変位制御液状化試験の適用性
多功能三轴试验装置研制及位移控制液化试验适用性
- 批准号:
08750600 - 财政年份:1996
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Encouragement of Young Scientists (A)
Triaxial test equipment for measuring properties of plastic clays and clay-sand mixtures
用于测量塑性粘土和粘土砂混合物性能的三轴试验设备
- 批准号:
173842-1995 - 财政年份:1995
- 资助金额:
$ 1.34万 - 项目类别:
Research Tools and Instruments - Category 1 (<$150,000)
Triaxial test system with seismic velocity measurement
具有地震速度测量功能的三轴测试系统
- 批准号:
173846-1995 - 财政年份:1994
- 资助金额:
$ 1.34万 - 项目类别:
Research Tools and Instruments - Category 1 (<$150,000)














{{item.name}}会员




