Research on Heat Transfer Control

本次合作研究“传热控制研究”的目的是调查过去和正在进行的传热控制研究工作。为了达到这一目的，举办了8次讲习班，并提出了28个专题，具体如下：1989.9.26在筑波AIST机械工程实验室发表了1.5次报告；1989.12.22在仙台东北大学工程学院发表了2.3次报告；1999.1.29在仙台东北大学流体科学研究所发表了4.3次报告；1999.6.12在仙台东北大学流体科学研究所发表了5.3次报告；1963年10月15日，东京工业大学工程系，东京；7.3年12月17日，仙台东北大学流体科学研究所，东京；8.4年3月29日，东京大学工业科学研究所。在研讨会上，讨论了传热控制的可能性和未来发展趋势。通过讨论，对传热控制进行了分类，明确了传热控制与常规温度控制的区别。结果在最后报告中总结为140页的10章合订本。总之，本研究的目的基本达到。

The purpose of the present Co-operative Research "Research on Heat Transfer Control" is to investigate past and on-going research works on heat transfer control.In order to achieve the purpose, workshops were held for 8 times, and 28 topics were presented, as follows :1.5 presentations, at Mechanical Engineering Laboratory, AIST, Tsukuba, September 26, 1989.2.3 presentations, at Faculty of Engineering, Tohoku University, Sendai, December 22, 1989.3.3 presentations, at Institute of Fluid Science, Tohoku University, Sendai, January 29, 1990.4.3 presentations, at Institute of Fluid Science, Tohoku University, Sendai, June 12, 1990.5.3 presentations, at Faculty of Engineering, Tokyo University, Tokyo, July 24, 1990.6.3 Presentations, at Faculty of Engineering, Tokyo Institute of Technology, Tokyo, October 15, 1990.7.3 presentations, at Institute of Fluid Science, Tohoku University, Sendai, December 17, 1990.8.4 presentations, at Institute of Industrial Science, Tokyo University, Tokyo, March 29, 1991.In the workshops, the possibility and the future trends of heat transfer control were discussed. Through the discussion, a classification of heat transfer control was made, and the difference between the heat transfer control and conventional temperature control was clarified. The results were summarized by a final report as a bound volume of 10 chapters in 140 pages.In brief, the purpose of the present research was almost fully achieved.