Multi-functionalization by Thin Film Formation Using the Ion Beam Mixing Method on Polymer

利用离子束混合方法在聚合物上形成薄膜的多功能化

• 批准号: 07650853
• 负责人: YAGASAKI Takayoshi
• 金额: $ 1.34万
• 依托单位: Kogakuin University
• 依托单位国家: 日本
• 项目类别: Grant-in-Aid for Scientific Research (C)
• 财政年份: 1995
• 资助国家: 日本
• 起止时间: 1995 至 1997
• 项目状态: 已结题
• 来源: https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-07650853/
• 关键词: Polyetherimide resin; Environmental degradation; Surface improvement; Ion beam mixing; Assisted vapor deposition; Thin film formation; Fatigue strength; Antibacterial test; 高分子系材料; Ti,TiO_2薄膜; 劣化挙動; 耐候性; 表面電気抵抗; リサイクル; ポリウレタンアクリレート系樹脂; ポリカー

We have tried to apply various methodes to protect polymeric materials against the environmental degradation, and to provide functions on their surface. The polyetherimide (PEI) resin has excellent characterristics in mechanical, thermal, and electrical and in crack resistance. Thus, its applications are being extended to precision components for electric and electronic devices and for medical equipment. In the area of medical care, the repetition of water wash or ray irradiation on tools must be applied after medical treatment in order to prevent bacterial infection. From these view points, this study is being made for evaluating the degradation behavior or the PEI resin as a result of water absorption and UV (ultraviolet) ray irradiation. And for the puropse of higher functionalization of PEI resin, the formation of thin film has been tried as a method the surface coating by vacuum vapor deposition and assisted vapor depoition using the ion beam mixing methods. The effect of thin film formation upon water absorption characteristics was also examined.

我们尝试了各种方法来保护聚合物材料免受环境降解，并在其表面提供功能。聚醚酰亚胺（PEI）树脂具有优异的力学、热学、电学和抗裂性能。因此，其应用正在扩展到电气和电子设备以及医疗设备的精密部件。在医疗护理领域，必须在医疗处理后对工具进行重复水洗或射线照射，以防止细菌感染。从这些观点出发，进行本研究以评价PEI树脂由于吸水和UV（紫外线）射线照射的降解行为。为了进一步提高PEI树脂的功能化程度，本文尝试了真空气相沉积法和离子束混合辅助气相沉积法在PEI树脂表面成膜。薄膜的形成对吸水特性的影响也进行了研究。

项目成果

Fuji, KIMURA, YAGASAKI: "Evaluation of Environmental Degradation Characteristics of Photopolymer Under UV Ray Irradiation and Water Immersion Conditions" Proceedings of 1st International conference on Mechanics of Time Dependent Materials. 1. 195-200 (199

Fuji、KIMURA、YAGASAKI：“紫外线照射和水浸条件下光聚合物的环境降解特性评估”第一届时间相关材料力学国际会议论文集。

Mari FUJI: "Evaluation of Environmental Degracation Characteristics of Photo polymer Under UV Ray Irradiation and Water Immersion Condetions" Proceedings of the 1st International Contereme on Mechanics of Time Dependent Materials. 195-200 (1995)

Mari FUJI：“在紫外线照射和水浸条件下光聚合物的环境降解特性评估”第一届国际时间依赖性材料力学会议论文集。

Mari JRJII: "Evaluation of Environmental Degradation Characteristics of Photopolymer Under UV Ray Irradiation and Water Immersion Conditions" Procoedings of the Ist Int. Conterence on Mechanieal of Time Dependent Materials. 1. 195-200 (1995)

Mari JRJII：“紫外线照射和水浸条件下光聚合物的环境降解特性评估”Ist Int 论文集。

矢ヶ崎・木村: "Trials for Molti-Functionalization on Polymer Based Materials by Thim Film Formation Using the Ion・Beam Mixing Mathod" (社)未踏技術協会 傾斜機能材料研究会報. 10. 36-40 (1996)

Yagasaki 和 Kimura：“使用离子束混合法通过薄膜形成对聚合物基材料进行多功能化试验”Mitou Techniques Association，功能梯度材料研究通报 10. 36-40 (1996)。

矢ケさき,木村: "ポリエーテルイミド樹脂の種々の環境因子による劣化が疲労挙動に及ぼす影響" 日本材料学会「材料」. 45. 73-78 (1996)

Yagasaki, Kimura：“各种环境因素导致的降解对聚醚酰亚胺树脂疲劳行为的影响”，日本材料协会，45. 73-78 (1996)