Transfer coating technique of metal foil using explosive energy and its application to industrial materials

利用爆炸能的金属箔转移涂覆技术及其在工业材料中的应用

• 批准号: 21560749
• 负责人: MORIZONO Yasuhiro
• 金额: $ 3万
• 依托单位: Kumamoto University
• 依托单位国家: 日本
• 项目类别: Grant-in-Aid for Scientific Research (C)
• 财政年份: 2009
• 资助国家: 日本
• 起止时间: 2009 至 2011
• 项目状态: 已结题
• 来源: https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-21560749/
• 关键词: 衝撃加工; 爆発エネルギー; コーティング; 熱処理; 反応拡散; 金属箔

Explosive energy attracts much interest as an energy source for material processing. In particular, it is industrially useful for bonding of various metals, and this process is well known as "explosive welding". In the present study, explosive energy was applied to the fabrication of titanium and steel substrates coated with a metal foil, such as aluminum with a thickness of 0. 1 mm. The obtained specimens were also heat-treated to investigate solid-and liquid-solid reactions between the metal foil and the substrate from the viewpoint of diffusion coating.

爆炸能作为一种材料加工的能源引起了人们的极大兴趣。特别是，它在工业上可用于各种金属的粘合，并且该过程被称为“爆炸焊接”。在本研究中，将爆炸能量应用于涂有金属箔（例如厚度为0的铝）的钛和钢基底的制造。还对所获得的试样进行热处理，以从扩散涂覆的观点研究金属箔和基板之间的固-和液-固反应。

项目成果

Influence of Heating Temperature on Interface Separation Behavior between Ti-20mol%Al Alloy and High Carbon Steel

影响%20的%20加热%20温度%20上%20界面%20分离%20行为%20之间%20Ti-20mol%Al%20合金%20和%20高%20碳%20钢

• 发表时间: 2009
• 期刊: Materials Transactions 50
• 作者: Y.Morizono;Y.Kodama;T.Yamamuro;M.Nishida
• 通讯作者: M.Nishida

Effect of Heat treatment on Interfacial Microstructures in Stainless steel Coated with Titanium Foil by using Explosive Energy

爆炸能热处理对钛箔不锈钢界面组织的影响

• 发表时间: 2011
• 作者: R.Tsukamoto;Y.Morizono;S.Tsurekawa
• 通讯作者: S.Tsurekawa

Solid-and Liquid-Solid Reactions on Ti Substrate Coated with Al Foil by using Explosive Energy

利用爆炸能量对镀有铝箔的钛基体进行固-液-固反应

• 发表时间: 2010
• 作者: Y. Morizono;T. Fukuyama and S. Tsurekawa
• 通讯作者: T. Fukuyama and S. Tsurekawa

Bi-rich Bi-Sn合金/Cuの接合界面組織と強度に及ぼす合金組成の影響

合金成分对富Bi Bi-Sn合金/Cu接头界面结构和强度的影响

• 发表时间: 2010
• 作者: 渡邉英二;森園靖浩;連川貞弘;山室賢輝
• 通讯作者: 山室賢輝

New surface Hardening Treatment of Titanium Materials by Pack Cementation

钛材料包埋新型表面硬化处理

• 发表时间: 2010
• 作者: Y.Kawano;H.Nemoto;T.Sako;Y.Morizono;S.Tsurekawa
• 通讯作者: S.Tsurekawa