Condition monitoring and process control of injection molding

注塑状态监测和过程控制

• 批准号: LP0349318
• 负责人: Prof Lingxue Kong
• 金额: $ 6.5万
• 依托单位: University of South Australia
• 依托单位国家: 澳大利亚
• 项目类别: Linkage Projects
• 财政年份: 2004
• 资助国家: 澳大利亚
• 起止时间: 2004-01-28 至 2006-12-13
• 项目状态: 已结题
• 来源: https://dataportal.arc.gov.au/RGS/Web/Grants/LP0349318
• 关键词: Condition; monitoring; process; control; injection

Injection molding has been widely used in automotive industry and improvement of the productivity and quality of the products is very important for the injection molding production to be internationally competitive. The aim of this project is to develop a condition monitoring and process control system to monitor the key parameters of the injection molding processes, to optimise the design and process conditions, and consequently, to more actively control the processes. This will lead to an more reliable process, improved productivity and production of higher quality of moldings.

注塑成型在汽车工业中得到了广泛的应用，提高产品的生产率和质量对于注塑成型产品的国际竞争力至关重要。该项目的目的是开发一个状态监测和过程控制系统，以监测注塑工艺的关键参数，优化设计和工艺条件，从而更积极地控制工艺。这将导致更可靠的工艺，提高生产率和生产更高质量的模制品。