Hip simulator study of wear characteristics of UHMWPE liner
Hip simulator study of wear characteristics of UHMWPE liner
批准号:
22591691
负责人:
YAMAMOTO Kengo
金额:
$3.08万
依托单位:
依托单位国家:
日本
项目类别:
Grant-in-Aid for Scientific Research (C)
财政年份:
2010
资助国家:
日本
项目状态:
已结题
起止时间:
2010 至 2012
中文摘要
用于全髋关节置换术的超高分子量聚乙烯(UHMWPE)衬垫。近年来,为了提高运动范围,衬垫厚度变薄、大直径也在不断发展。本研究采用3.5/4.0mm厚度44mm直径的PE衬垫,在标准模拟器测试条件下进行了500万次的髋关节模拟器测试。与未掺杂PE衬垫相比,0.1% α -生育酚(0.1%重量比)掺杂杯没有磨损优势。
英文摘要
The ultra highly molecular weight polyethylene (UHMWPE) liner used in total hip replacement. Recently, thinning of thickness and large-diameter of liner is progressing for the range of motion improved. In this study, hip simulator test had run by using 3.5/4.0mm thickness 44mm diameter PE liner under standard simulator test conditionsup to 5 million cycles. Compared to non doped PE liner, There was no wear advantage related to 0.1% alpha-tocopheral (0.1% by weight) doped cup.
期刊论文(0)
专著(0)
科研奖励(0)
会议论文
Effect of acetabular liner thickness on creep resistance in HXLPE for total joint replacement: deformation rate and molecular structure
-
批准号:25462383
-
项目类别:Grant-in-Aid for Scientific Research (C)
-
资助金额:$3.16万
-
财政年份:2013
-
负责人:YAMAMOTO Kengo
-
依托单位:
海外基金