環境に配慮した海外RC建物の制振改修手法の構築

为海外RC建筑开发环保减振修复方法

基本信息

  • 批准号:
    15J10631
  • 负责人:
  • 金额:
    $ 1.22万
  • 依托单位:
  • 依托单位国家:
    日本
  • 项目类别:
    Grant-in-Aid for JSPS Fellows
  • 财政年份:
    2015
  • 资助国家:
    日本
  • 起止时间:
    2015-04-24 至 2017-03-31
  • 项目状态:
    已结题

项目摘要

まず前年度の研究で行ったトルコの既存RCフレームに制振部材を導入した補強フレームの載荷実験の結果に関して分析した。また実験においてみられた補強フレームとモルタル接合部及び既存RC架構の合成効果が改修建物全体に及ぼす影響について考察した。結論として,実験でみられた部材の合成効果をマクロな建物解析モデルで均一に評価した場合,想定地震時における建物各層の最大変形が安全側に評価されることが確認できた。一方で,実験における合成効果が建物の層方向にばらついて生じる場合,部材剛性の偏在がさらに顕在化することで合成効果が生じない層への損傷集中が生じ,合成効果が全層で生じない場合に比べても建物モデルの応答が励起される場合が考えられることがわかった。以上より,実際の改修設計においてはそうした事象も考慮すべきであることを示した。また,昨年度に提案した遺伝的アルゴリズムを用いたダンパーの最適設計法に関しては,ねじれ振動が卓越する偏心建物に対する平面的なダンパー配置の設計にも適用できるようその適用範囲を拡張し,得られる設計解について分析した。最適ダンパー設計システムにおいては新たに解析モデルとして地震入力時の建物のねじれ挙動を再現可能な擬似立体モデルを設定可能とし,既往研究において提案した手計算に基づく改修設計法によるダンパー設計解と最適化計算による最適ダンパー設計解を比較することにより,その妥当性を示した。また,異なる設計クライテリアを前提とした改修設計解について分析するため,多目的最適化手法を導入することで変形クライテリアと投入ダンパー量の2つの目的関数を対象とした最適ダンパー設計システムを構築した。多目的最適化手法により得られたパレート最適解を分析することで,筆者の既往研究で提案した手計算レベルの改修設計法によるダンパー設計解が各変形クライテリアにおいて概ね妥当な値を示すことがわかった。
In the previous year's research, the existing RC vibration damping components were introduced into the RC vibration damping system and the load control results were analyzed. In addition, the influence of the composite effect of the existing RC structure on the whole structure and the reinforcement of the structure was investigated. Conclusion: In order to determine the maximum shape of each layer of a building during an earthquake, it is necessary to evaluate the safety side of the building. On the one hand, when the composite effect occurs in the layer direction of the building, the rigidity of the component is biased. When the composite effect occurs in the layer, the damage concentration occurs. When the composite effect occurs in the whole layer, the composite effect occurs in the layer direction. When the composite effect occurs in the layer direction, the damage concentration occurs in the layer direction. When the composite effect occurs in the layer direction, the damage concentration occurs. When the composite effect occurs in the layer direction. The above is a review of the design process. In addition, the optimal design method for the design of a planar eccentric structure with respect to vibration was proposed last year, and the applicable range of design solutions was analyzed. The optimum design solution is compared with the optimum design solution in the previous study, and the validity of the proposed method is shown. In addition, the optimization method of multi-purpose design is introduced into the optimization system of different design conditions, and the optimization method of multi-purpose design solutions is constructed according to the optimal design conditions. In this paper, the author proposes a modified design method for multi-purpose optimization, which can be used to analyze the optimal solution of multi-purpose optimization.

项目成果

期刊论文数量(0)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
CYCLIC LOADING TESTS OF SUB-STANDARD RC FRAMES RETROFITTED WITH BUCKLING RESTRAINED BRACES AND ELASTIC STEEL FRAMES
屈曲约束支撑和弹性钢框架改造的次标RC框架循环加载试验
Optimazation of Energy-Dissipation Devices Arrangement for Seismic Retrofit of Truss Tower Structures
桁架塔结构抗震改造消能装置布置优化
  • DOI:
  • 发表时间:
    2015
  • 期刊:
  • 影响因子:
    0
  • 作者:
    H. Koshikawa;K. Kamiya;S. Nakanishi;K. Hashimoto;佐藤光樹;辻岳史;藤下和浩;佐藤光樹;Takashi TSUJI;Kazuhiro Fujishita;辻岳史・黒田由彦;辻岳史・黒田由彦;藤下和浩;藤下和浩;辻岳史;辻岳史;Kazuhiro Fujishita
  • 通讯作者:
    Kazuhiro Fujishita
Damage Distribution based Energy-Dissipation Retrofit Method for Multi Story RC Building in Turkey
土耳其多层钢筋混凝土建筑基于损伤分布的能量耗散改造方法
  • DOI:
  • 发表时间:
    2015
  • 期刊:
  • 影响因子:
    0
  • 作者:
    H. Koshikawa;K. Kamiya;S. Nakanishi;K. Hashimoto;佐藤光樹;辻岳史;藤下和浩;佐藤光樹;Takashi TSUJI;Kazuhiro Fujishita;辻岳史・黒田由彦;辻岳史・黒田由彦;藤下和浩;藤下和浩;辻岳史;辻岳史;Kazuhiro Fujishita;辻岳史;Kazuhiro Fujishita
  • 通讯作者:
    Kazuhiro Fujishita
OPTIMIZATION OF DAMPER ARRANGEMENT WITH HYBRID GA USING ELASTO-PLASTIC RESPONSE ANALYSIS ON SEISMIC RESPONSE CONTROL RETROFIT
地震响应控制改造中利用弹塑性响应分析的混合气体阻尼器布置优化
Hybrid GAおよび弾塑性応答解析を用いた制振改修におけるダンパーの最適設計
使用混合遗传算法和弹塑性响应分析进行阻尼修改的阻尼器优化设计
  • DOI:
  • 发表时间:
    2015
  • 期刊:
  • 影响因子:
    0
  • 作者:
    H. Koshikawa;K. Kamiya;S. Nakanishi;K. Hashimoto;佐藤光樹;辻岳史;藤下和浩;佐藤光樹;Takashi TSUJI;Kazuhiro Fujishita;辻岳史・黒田由彦;辻岳史・黒田由彦;藤下和浩
  • 通讯作者:
    藤下和浩
{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

数据更新时间:{{ journalArticles.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ monograph.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ sciAawards.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ conferencePapers.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ patent.updateTime }}

藤下 和浩其他文献

藤下 和浩的其他文献

{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}
{{ showInfoDetail.title }}

作者:{{ showInfoDetail.author }}

知道了