RESEARCH ON PRACTICAL DESIGN OF MATRIX CONVERTER
矩阵变换器实用设计研究
基本信息
- 批准号:09555089
- 负责人:
- 金额:$ 7.1万
- 依托单位:
- 依托单位国家:日本
- 项目类别:Grant-in-Aid for Scientific Research (B)
- 财政年份:1997
- 资助国家:日本
- 起止时间:1997 至 1999
- 项目状态:已结题
- 来源:
- 关键词:
项目摘要
The research project titled "Research on practical design of Matrix Converter" has been carried out from 1997 to 1999 in faculty of engineering, Nagasaki University. The aim of this project is to develop a new, compact and reliable AC-AC converter system. The results obtained from this project are summarized as follow;(1) We have built two 3KVA voltage-type Matrix Converters with DSP controller and tested them with different carrier frequencies from 2KHz up to 5KHz. As the carrier frequency goes higher, we get better distortion factor of input current with more than 90% efficiency.(2) Distortion factor of input current of the matrix converter operating with asynchronous carrier is poorer than with synchronous carrier, but it can be improved by using higher carrier frequency.(3) We simulated the matrix converter by "SIMPLORER''; a simulation software for power electronic circuit, and investigated effects of LC input filter and snubber circuits on the distortion factor and valve stress.(4) In order to ease the valve stresses, we have introduced soft switching technique and designed a Auxiliary Resonant Commutated Pole Matrix Converter (ARCPMC) with DSP and FPGA control circuit.(5) We have simulated ARCPMC and confirmed the soft switching operation.
1997年至1999年,长崎大学工程学院开展了“矩阵转换器实用设计研究”的研究工作。本项目的目的是开发一种新型、紧凑、可靠的交-交变流系统。本课题取得的成果总结如下:(1)利用数字信号处理器搭建了两台3KVA电压型矩阵转换器,并在2 KHz到5 KHz的不同载频下对其进行了测试。载频越高,输入电流的畸变率越好,效率在90%以上。(2)异步载波工作的矩阵转换器的输入电流失真比同步载波工作的要差,但使用更高的载波频率可以改善输入电流的失真。利用电力电子电路仿真软件,研究了LC输入滤波和缓冲电路对功率因数和阀应力的影响。(4)为了减小阀应力,引入了软开关技术,设计了一种辅助谐振换向极点矩阵转换器(ARCPMC),并结合DSP和FPGA控制电路。(5)对ARCPMC进行了仿真,验证了其软开关工作状态。
项目成果
期刊论文数量(0)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
OYAMA,JUN: "Simulation of the Auxiliary Resonant Commutated Pole Matrix Converter"Proceedings of the 1999 Japan Industry Application Society Conference. 3. 129-130 (1999)
OYAMA,JUN:“辅助谐振换向极点矩阵转换器的模拟”1999 年日本工业应用协会会议论文集。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
小山 純: "IGBTを用いたPWMサイクロコンバータの諸特性" 平成9年電気関係学会九州支部連合会大会論文集. 1022 (1997)
Jun Koyama:“使用 IGBT 的 PWM 环路转换器的特性”1997 年电气工程学会九州分会联合会论文集 1022(1997 年)。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
石井佐田夫: "誘導機をベクトル制御で駆動したときのPWM細工炉コンバータの制御特性"平成11年電気学会産業応用部門大会論文集. Vol.3. 163-166 (1999)
Sadao Ishii:“矢量控制驱动感应电机时 PWM 炉变流器的控制特性”1999 年 IEEJ 工业应用分部会议论文集,第 3 卷 163-166(1999 年)。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
R.Teichmann: "Controller Design for Auxiliary Resonant Commutated Pole Matrix Converter"EPE-PEMC Conference Record. (in print). (2000)
R.Teichmann:“辅助谐振换向极矩阵转换器的控制器设计”EPE-PEMC会议记录。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
小山 純: "Displacemant Angle Control of Matrix Converter"IEEE Power Electronics Specialists Conference. Vol.2. 1033-1039 (1997)
Jun Koyama:“矩阵转换器的位移角控制”IEEE 电力电子专家会议第 2 卷(1997 年)。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
数据更新时间:{{ journalArticles.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ monograph.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ sciAawards.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ conferencePapers.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ patent.updateTime }}
OYAMA Jun其他文献
OYAMA Jun的其他文献
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
{{ truncateString('OYAMA Jun', 18)}}的其他基金
RESEARCH ON PRACTICAL REALIZATION OF ARCP MATRIX CONVERTER
ARCP矩阵转换器的实际实现研究
- 批准号:
17360126 - 财政年份:2005
- 资助金额:
$ 7.1万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Development of Ultra High Speed Generator ; Motor and Drive System
超高速发电机的开发;
- 批准号:
15360152 - 财政年份:2003
- 资助金额:
$ 7.1万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Development of Linear Synchronous Motor for High Speed Conveyance with Field Flux Control Function
具有磁场磁通控制功能的高速输送直线同步电机的开发
- 批准号:
13650310 - 财政年份:2001
- 资助金额:
$ 7.1万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
Developmental Research of Switched Reluctance Motor with AC Excitation.
交流励磁开关磁阻电机的发展研究。
- 批准号:
04555061 - 财政年份:1992
- 资助金额:
$ 7.1万 - 项目类别:
Grant-in-Aid for Developmental Scientific Research (B)
相似国自然基金
金属氧化物TFT有源模拟PWM驱动Micro-LED显示研究
- 批准号:
- 批准年份:2024
- 资助金额:15.0 万元
- 项目类别:省市级项目
多频复合电流跟踪PWM控制磁耦合谐振无线电能传输机理及关键问题研究
- 批准号:
- 批准年份:2022
- 资助金额:54 万元
- 项目类别:面上项目
全域非谐振式PWM软开关变换理论与关键技术研究
- 批准号:52237009
- 批准年份:2022
- 资助金额:269 万元
- 项目类别:重点项目
基于零序电压注入的电流型PWM整流器制氢电源拓扑与电网/负载友好型自适应控制研究
- 批准号:52207195
- 批准年份:2022
- 资助金额:30 万元
- 项目类别:青年科学基金项目
基于PWM参数协同调控的并网变流器集群优化运行方法及技术
- 批准号:
- 批准年份:2022
- 资助金额:30 万元
- 项目类别:青年科学基金项目
基于PWM 优化的电力电子系统EMI 噪声抑制研究
- 批准号:2021JJ40076
- 批准年份:2021
- 资助金额:0.0 万元
- 项目类别:省市级项目
PWM激励下电励磁磁通切换电机励磁绕组感应脉动电压产生机理及其抑制方法研究
- 批准号:
- 批准年份:2021
- 资助金额:30 万元
- 项目类别:青年科学基金项目
大功率(>10MW)多三相永磁风力发电系统的优化PWM 控制技术研究
- 批准号:2021JJ40078
- 批准年份:2021
- 资助金额:0.0 万元
- 项目类别:省市级项目
电压型PWM变流器直流端口谐波电流建模及解耦方法研究
- 批准号:
- 批准年份:2021
- 资助金额:0.0 万元
- 项目类别:省市级项目
背靠背双PWM变换器的共模电压抑制方法研究
- 批准号:
- 批准年份:2021
- 资助金额:55 万元
- 项目类别:面上项目
相似海外基金
CAREER: Irregular Modulation: Harnessing the Hidden Potential of PWM
职业:不规则调制:利用 PWM 的隐藏潜力
- 批准号:
2339806 - 财政年份:2024
- 资助金额:
$ 7.1万 - 项目类别:
Continuing Grant
Development of Novel EV Quick Charging System using Resonance Type MMC with PWM and PAM Complex Control
使用具有 PWM 和 PAM 复合控制的谐振型 MMC 开发新型电动汽车快速充电系统
- 批准号:
23K03796 - 财政年份:2023
- 资助金额:
$ 7.1万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
3D Pseudo-force Devices using High Frequency PWM Control
使用高频 PWM 控制的 3D 伪力装置
- 批准号:
22K12115 - 财政年份:2022
- 资助金额:
$ 7.1万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
Perfect Tracking Control by PWM-Type Input
通过 PWM 型输入实现完美跟踪控制
- 批准号:
19K04438 - 财政年份:2019
- 资助金额:
$ 7.1万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
Building a theoretical framework for precise control of PWM-type input systems by exact linearization
通过精确线性化建立精确控制 PWM 型输入系统的理论框架
- 批准号:
17K14698 - 财政年份:2017
- 资助金额:
$ 7.1万 - 项目类别:
Grant-in-Aid for Young Scientists (B)
Design and implementation of PWM inverter using GaN power devices and its applications
GaN功率器件PWM逆变器的设计与实现及其应用
- 批准号:
16H04320 - 财政年份:2016
- 资助金额:
$ 7.1万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Study on motor insulation system subjected to high frequency PWM pulses
高频PWM脉冲作用下电机绝缘系统研究
- 批准号:
435190-2012 - 财政年份:2015
- 资助金额:
$ 7.1万 - 项目类别:
Industrial Postgraduate Scholarships
A study of directly generating method of a PWM signal and its application using learning and repetitive control techniques
学习与重复控制技术直接产生PWM信号的方法及其应用研究
- 批准号:
15K05950 - 财政年份:2015
- 资助金额:
$ 7.1万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
Study on motor insulation system subjected to high frequency PWM pulses
高频PWM脉冲作用下电机绝缘系统研究
- 批准号:
435190-2012 - 财政年份:2014
- 资助金额:
$ 7.1万 - 项目类别:
Industrial Postgraduate Scholarships
Study on motor insulation system subjected to high frequency PWM pulses
高频PWM脉冲作用下电机绝缘系统研究
- 批准号:
435190-2012 - 财政年份:2013
- 资助金额:
$ 7.1万 - 项目类别:
Industrial Postgraduate Scholarships